PURPOSE: The current vitreous substitutes such as silicone oil, heavy silicone oil, and polymeric gels that are directly injected into vitreous cavity frequently cause severe intraocular complications. There is a very urgent need to find a more suitable artificial vitreous substitute for pars plana vitrectomy (PPV) surgery. METHODS: We have devised a novel capsular artificial vitreous using tailor-made silicone rubber elastomer. The novel device was implanted into the vitreous cavity of rabbit after PPV and the eye was examined by ophthalmoscopy, fundus photography, and tonometry during an 8-week treatment period. B-scan ultrasonography, electroretinogram (ERG), and histological studies by light microscopy were also performed at the end of 8 weeks. RESULTS: The novel artificial vitreous body consists of a thin vitreous-like capsule with a silicone tube-valve system. The capsule can be folded and implanted into vitreous cavity through 1.5 mm incision on sclera. Physiological balanced solution (PBS) was then injected into the capsule and inflated to support retina and control intraocular pressure (IOP) through the tube-valve system subsequently fixed under the conjunctiva. Experiments using rabbits showed that the novel vitreous body could effectively support the retina and apparently induced no significant pathological changes in the eye over 8 weeks. CONCLUSION: This approach may provide a new research strategy in the vitreous replacement technology. The novel artificial vitreous body device can effectively support retina, control IOP, and has good biocompatibility. It may be a good alternative to injecting artificial vitreous although its tamponade properties and usefulness still have to be proven in complex vitreoretinal diseases.
PURPOSE: The current vitreous substitutes such as silicone oil, heavy silicone oil, and polymeric gels that are directly injected into vitreous cavity frequently cause severe intraocular complications. There is a very urgent need to find a more suitable artificial vitreous substitute for pars plana vitrectomy (PPV) surgery. METHODS: We have devised a novel capsular artificial vitreous using tailor-made silicone rubber elastomer. The novel device was implanted into the vitreous cavity of rabbit after PPV and the eye was examined by ophthalmoscopy, fundus photography, and tonometry during an 8-week treatment period. B-scan ultrasonography, electroretinogram (ERG), and histological studies by light microscopy were also performed at the end of 8 weeks. RESULTS: The novel artificial vitreous body consists of a thin vitreous-like capsule with a silicone tube-valve system. The capsule can be folded and implanted into vitreous cavity through 1.5 mm incision on sclera. Physiological balanced solution (PBS) was then injected into the capsule and inflated to support retina and control intraocular pressure (IOP) through the tube-valve system subsequently fixed under the conjunctiva. Experiments using rabbits showed that the novel vitreous body could effectively support the retina and apparently induced no significant pathological changes in the eye over 8 weeks. CONCLUSION: This approach may provide a new research strategy in the vitreous replacement technology. The novel artificial vitreous body device can effectively support retina, control IOP, and has good biocompatibility. It may be a good alternative to injecting artificial vitreous although its tamponade properties and usefulness still have to be proven in complex vitreoretinal diseases.
Authors: R Zhang; T Wang; C Xie; X Lin; Z Jiang; Z Wang; Y Liu; Y Luo; C Long; L He; P Wang; Q Gao Journal: Eye (Lond) Date: 2011-03-18 Impact factor: 3.775
Authors: Christopher D Pritchard; Sven Crafoord; Sten Andréasson; Karin M Arnér; Timothy M O'Shea; Robert Langer; Fredrik K Ghosh Journal: Acta Biomater Date: 2010-11-24 Impact factor: 8.947
Authors: Peijuan Wang; Qianying Gao; Xiaofeng Lin; Shaochong Zhang; Jie Hu; Yaqin Liu; Nuo Xu; Jian Ge Journal: PLoS One Date: 2012-10-01 Impact factor: 3.240