Calibration of CE-QUAL-W2 for a monomictic reservoir in a monsoon climate area.

The impact of inflow mixing on reservoir stratification is significant for reservoirs situated in a monsoon climate area. It cause difficulty in the calibration of a two-dimensional hydrodynamic and water quality model, CE-QUAL-W2 that was recently adopted for a real-time turbidity monitoring and modelling system (RTMMS) for a reservoir in Korea. This paper presents a systematic calibration and verification processe of the model for the reservoir. A sensitivity analysis showed that wind sheltering, Chezy, and sediment heat exchange coefficients are most sensitive to stratification structure. Inflow temperature was very sensitive during a year of normal precipitation, but it is not significant during a year of drought. Residual analysis revealed that the model has shortcomings in the simulation of water temperature near the metalimnetic zone without calibration. After calibration, however, the absolute mean errors between observed and simulated values were placed within 0.116-1.190 degrees C. Its performance was maintained under heavy flood events during the verification stage, which implies that the model is ready to use for the simulation of turbidity plume in the RTMMS under various hydrologic conditions. The suggested model calibration strategy and relevant results may be adopted for other reservoirs located in a monsoon climate area.