Literature DB >> 17095084

The role of whole blood in thrombin generation in contact with various titanium surfaces.

Andreas Thor1, Lars Rasmusson, Ann Wennerberg, Peter Thomsen, Jan-Michael Hirsch, Bo Nilsson, Jaan Hong.   

Abstract

Understanding of the thrombotic response (activation of the intrinsic coagulation system followed by platelet activation) from blood components upon contact with a titanium dental implant is important and not fully understood. The aims of this study were to evaluate: (1) the thrombogenic response of whole blood, platelet-rich plasma (PRP) and platelet-poor plasma (PPP) in contact with a highly thrombogenic surface as titanium, (2) the thrombogenic response of clinically used surfaces as hydroxyapatite (HA), machined titanium (mTi), TiO2 grit-blasted titanium (TiOB) and fluoride ion-modified grit-blasted titanium (TiOB-F). An in vitro slide chamber model, furnished with heparin, was used in which whole blood, PRP or PPP came in contact with slides of the test surfaces. After incubation (60 min rotation at 22 rpm in a 37 degrees C water bath), blood/plasma was mixed with EDTA or citrate, further centrifuged at +4 degrees C (2200 g at 10 min). Finally, plasma was collected pending analysis. Whole blood in contact with Ti alloy resulted in the binding of platelets to the material surface and in the generation of thrombin-antithrombin (TAT) complexes. With whole blood TAT levels increased 1000-fold compared with PRP and PPP, in which both almost no increase of TAT could be detected. In addition, the platelet activation showed a similar pattern with a 15-fold higher release of beta-TG in whole blood. In the in vitro chamber model with the clinically relevant materials, the fluoride-modified surface (TiOB-F) showed pronounced TAT generation compared with TiOB, mTi and HA. Similar results were achieved for platelet consumption and activation markers of the intrinsic coagulation system. Taken together these results implicate first that whole blood is necessary for sufficient thrombin generation and platelet activation during placement of implants. Second, a fluoride ion modification seems to augment the thrombogenic properties of titanium.

Entities:  

Mesh:

Substances:

Year:  2006        PMID: 17095084     DOI: 10.1016/j.biomaterials.2006.10.020

Source DB:  PubMed          Journal:  Biomaterials        ISSN: 0142-9612            Impact factor:   12.479


  17 in total

1.  The biocompatibility of titanium cardiovascular devices seeded with autologous blood-derived endothelial progenitor cells: EPC-seeded antithrombotic Ti implants.

Authors:  Hardean E Achneck; Ryan M Jamiolkowski; Alexandra E Jantzen; Justin M Haseltine; Whitney O Lane; Jessica K Huang; Lauren J Galinat; Michael J Serpe; Fu-Hsiung Lin; Madison Li; Amar Parikh; Liqiao Ma; Tao Chen; Bantayehu Sileshi; Carmelo A Milano; Charles S Wallace; Thomas V Stabler; Jason D Allen; George A Truskey; Jeffrey H Lawson
Journal:  Biomaterials       Date:  2010-11-05       Impact factor: 12.479

2.  Molecular dynamics simulation of RGD peptide adsorption on titanium oxide surfaces.

Authors:  Hong-Ping Zhang; Xiong Lu; Li-Ming Fang; Jie Weng; Nan Huang; Yang Leng
Journal:  J Mater Sci Mater Med       Date:  2008-06-27       Impact factor: 3.896

3.  Design of a pulsatile flow facility to evaluate thrombogenic potential of implantable cardiac devices.

Authors:  Sivakkumar Arjunon; Pablo Hidalgo Ardana; Neelakantan Saikrishnan; Shalv Madhani; Brent Foster; Ari Glezer; Ajit P Yoganathan
Journal:  J Biomech Eng       Date:  2015-02-11       Impact factor: 2.097

4.  Bone augmentation in rabbit tibia using microfixed cobalt-chromium membranes with whole blood, tricalcium phosphate and bone marrow cells.

Authors:  Oscar Decco; Andrea Cura; Víctor Beltrán; María Lezcano; Wilfried Engelke
Journal:  Int J Clin Exp Med       Date:  2015-01-15

5.  Interaction of blood plasma proteins with superhemophobic titania nanotube surfaces.

Authors:  Roberta Maia Sabino; Kirsten Kauk; Sanli Movafaghi; Arun Kota; Ketul C Popat
Journal:  Nanomedicine       Date:  2019-07-03       Impact factor: 5.307

6.  Ultraviolet photofunctionalization of nanostructured titanium surfaces enhances thrombogenicity and platelet response.

Authors:  Nagat Areid; Ilkka Kangasniemi; Eva Söderling; Timo O Närhi
Journal:  J Mater Sci Mater Med       Date:  2018-05-04       Impact factor: 3.896

7.  Bone tissue response to titanium implant surfaces modified with carboxylate and sulfonate groups.

Authors:  S Kerner; V Migonney; G Pavon-Djavid; G Helary; L Sedel; F Anagnostou
Journal:  J Mater Sci Mater Med       Date:  2009-11-10       Impact factor: 3.896

8.  Changes in proinflammatory gene expression in human whole blood after contact with UV-conditioned implant surfaces.

Authors:  Sönke Harder; Elgar Susanne Quabius; Fabian Meinke; Christian Mehl; Matthias Kern
Journal:  Clin Oral Investig       Date:  2019-01-21       Impact factor: 3.573

Review 9.  Surface modification of biomedical and dental implants and the processes of inflammation, wound healing and bone formation.

Authors:  Clark M Stanford
Journal:  Int J Mol Sci       Date:  2010-01-25       Impact factor: 5.923

10.  In vitro osteogenic properties of two dental implant surfaces.

Authors:  Marta Monjo; Christiane Petzold; Joana Maria Ramis; Staale Petter Lyngstadaas; Jan Eirik Ellingsen
Journal:  Int J Biomater       Date:  2012-10-15
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.