Literature DB >> 16916231

Bond strength to primed Ti-6Al-7Nb alloy of two acrylic resin adhesives.

Hiroyasu Koizumi1, Mika Furuchi, Naomi Tanoue, Hiroaki Yanagida, Takayuki Yoneyama, Hideo Matsumura.   

Abstract

This study aimed to evaluate the bonding behavior of two acrylic resin adhesives joined to titanium-aluminum-niobium (Ti-6Al-7Nb) alloy primed with two metal conditioners. Cast Ti-6Al-7Nb alloy disks were air-abraded with alumina and bonded with six combinations of two resin adhesives (Super-Bond C&B and Multi Bond) and three surface conditions (Alloy Primer, M.L. Primer, and unprimed control). Shear bond strengths were determined both before and after 20,000 thermal cycles. The tri-n-butylborane initiated Super-Bond C and B resin exhibited greater bond strength than the BPO-amine initiated Multi-Bond resin. Both the Alloy Primer with a hydrophobic phosphate and the M.L. Primer with a phosphonoacetate effectively improved the 24-hour bond strength of Multi-Bond resin as well as the post-thermocycling bond strength of Super-Bond C and B resin.

Entities:  

Mesh：

Substances：

Year:  2006        PMID： 16916231     DOI： 10.4012/dmj.25.286

Source DB:  PubMed          Journal:  Dent Mater J        ISSN： 0287-4547            Impact factor:   2.102


  4 in total

1.  Evaluation of two dual-functional primers and a tribochemical surface modification system applied to the bonding of an indirect composite resin to metals.

Authors:  Hiroaki Yanagida; Naomi Tanoue; Takako Ide; Hideo Matsumura
Journal:  Odontology       Date:  2009-07-29       Impact factor: 2.634

2.  Evaluation and comparison of the effect of different surface treatment modifications on the shear bond strength of a resin cement to titanium: An in vitro study.

Authors:  Tahsin Mansur Veljee; C S Shruthi; R Poojya
Journal:  J Indian Prosthodont Soc       Date:  2015 Oct-Dec

3.  Evaluation of the effect of ultraviolet light polymerized clear adhesive on shear and tensile bond strength of heat cure denture base resin to the cobalt-chromium retentive minor connector: An in vitro study.

Authors:  Minal Sanjay Kumthekar; Shivsagar Tewary; Pronob Kumar Sanyal
Journal:  J Indian Prosthodont Soc       Date:  2020-10-08

4.  Comparison of the effectiveness of Tokuyama and GC II metal primer on the bond strength of acrylic resins to Ti-6Al-7Nb.

Authors:  Sunit Kumar Jurel; Niraj Mishra; Pooran Chand; Himanshi Aggarwal; Raghuwar Dayal Singh; Balendra Pratap Singh
Journal:  Natl J Maxillofac Surg       Date:  2017 Jul-Dec
  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.