Warning: Undefined array key "mm" in /www/wwwroot/www.ai-bt.com/si.php on line 10 Deprecated: trim(): Passing null to parameter #1 ($string) of type string is deprecated in /www/wwwroot/www.ai-bt.com/si.php on line 10 The effect of temperature on PAHs emission from incineration of acrylic waste.

Literature DB >> 16897506

The effect of temperature on PAHs emission from incineration of acrylic waste.

Abstract

Incineration of acrylic waste solution in a lab scale quartz tube vertical incinerator showed the presence of 12-15 polycyclic aromatic hydrocarbons (PAHs) from a list of 16 priority pollutants at 700-1100 degrees C after an interval of 50 degrees C. The amount of total 16 PAHs at 900 and 1100 degrees C was about 8.5 and 1.25 times higher than those at 700 degrees C (739.48 microg g(-1)) respectively. The amount of total probable (2A) and possible (2B) human carcinogenic PAHs was minimum at 700 degrees C.

Entities: Chemical Disease Species

Mesh：

Substances：

Year: 2006 PMID： 16897506 DOI： 10.1007/s10661-006-9260-3

Source DB: PubMed Journal: Environ Monit Assess ISSN： 0167-6369 Impact factor: 2.513

5 in total

1. Overall evaluations of carcinogenicity: an updating of IARC Monographs volumes 1 to 42.

Authors:
Journal: IARC Monogr Eval Carcinog Risks Hum Suppl Date: 1987

2. PAH and soot emissions from burning components of medical waste: examination/surgical gloves and cotton pads.

Authors: Y A Levendis; A Atal; J B Carlson; M D Quintana
Journal: Chemosphere Date: 2001 Feb-Mar Impact factor: 7.086

3. Effects of combustion temperature on PCDD/Fs formation in laboratory-scale fluidized-bed incineration.

Authors: T Hatanaka; T Imagawa; A Kitajima; M Takeuchi
Journal: Environ Sci Technol Date: 2001-12-15 Impact factor: 9.028

4. Polynuclear aromatic hydrocarbon and particulate emissions from two-stage combustion of polystyrene: the effects of the secondary furnace (afterburner) temperature and soot filtration.

Authors: Jun Wang; Henning Richter; Jack B Howard; Yiannis A Levendis; Joel Carlson
Journal: Environ Sci Technol Date: 2002-02-15 Impact factor: 9.028

5. Emission characteristics of PCDD/Fs, PCBs, chlorobenzenes, chlorophenols, and PAHs from polyvinylchloride combustion at various temperatures.

Authors: Kyung-Seop Kim; Kil-Hwan Hong; Young-Hwan Ko; Man-Goo Kim
Journal: J Air Waste Manag Assoc Date: 2004-05 Impact factor: 2.235

5 in total

3 in total

The effect of temperature on PAHs emission from incineration of acrylic waste.

1. Overall evaluations of carcinogenicity: an updating of IARC Monographs volumes 1 to 42.

2. PAH and soot emissions from burning components of medical waste: examination/surgical gloves and cotton pads.

3. Effects of combustion temperature on PCDD/Fs formation in laboratory-scale fluidized-bed incineration.

4. Polynuclear aromatic hydrocarbon and particulate emissions from two-stage combustion of polystyrene: the effects of the secondary furnace (afterburner) temperature and soot filtration.

5. Emission characteristics of PCDD/Fs, PCBs, chlorobenzenes, chlorophenols, and PAHs from polyvinylchloride combustion at various temperatures.

1. Effect of combustion variables on PAHs emission from incineration of cellulose waste filters from acrylic industry.

Review 2. Toxic environmental releases from medical waste incineration: a review.

3. PAHs in some brands of tea.