Literature DB >> 16872459

Push-out bond strengths: the Epiphany-Resilon endodontic obturation system compared with different pairings of Epiphany, Resilon, AH Plus and gutta-percha.

M Ungor1, E O Onay, H Orucoglu.   

Abstract

AIM: To assess the bond strength of the new resin-based Epiphany-Resilon root canal filling system, and to compare this with bond strengths of different pairings of AH Plus, gutta-percha, Epiphany and Resilon.
METHODOLOGY: A total of 65 extracted human single-rooted teeth were used. All teeth were instrumented using a set of ProTaper rotary instruments. Irrigation was performed with 15 mL of 1.25% NaOCl between each instrument and the smear layer was removed during and after instrumentation with 5 mL of 17% EDTA. The canal spaces were filled with different combinations of core and sealer using lateral condensation, as follows: group 1, AH Plus + gutta-percha; group 2, AH Plus + Resilon; group 3, Epiphany + Resilon; group 4, Epiphany + gutta-percha; group 5 (control), gutta-percha only. Cylinders of root dentine 1.13 (0.06)-mm long were prepared from the coronal sections of the 65 teeth. The test specimens were subjected to the push-out test method. After adhesion testing, the remaining sections were examined under a stereomicroscope at x 25 magnification to determine the nature of bond failure. The values of bond strength were analyzed by one-way analysis of variance (ANOVA) and the post hoc Tukey's test, with significance set at P < 0.05.
RESULTS: The respective mean push-out test values for groups 1-5 were: 2.000 +/- 0.369, 1.380 +/- 0.154, 1.706 +/- 0.340, 2.857 +/- 0.523 and 0.078 +/- 0.027 MPa. Significant difference (P < 0.001) occurred between the groups. Multiple paired comparisons (Tukey's test) revealed that group 4 (Epiphany + gutta-percha) had significantly (P < 0.001) greater bonding strength than all the other groups; group 1 (AH Plus + gutta-percha) had significantly (P < 0.05) greater bonding strength than group 2 (AH Plus + Resilon); and group 5 (control) had significantly (P < 0.05) lower bonding strength than all the other groups. Inspection of the surfaces revealed the bond failure to be mainly adhesive to dentine for all groups.
CONCLUSIONS: The Epiphany-Resilon combination (group 3) was not superior to that of the AH Plus-gutta percha combination (group 1).

Entities:  

Mesh:

Substances:

Year:  2006        PMID: 16872459     DOI: 10.1111/j.1365-2591.2006.01132.x

Source DB:  PubMed          Journal:  Int Endod J        ISSN: 0143-2885            Impact factor:   5.264


  25 in total

1.  An ex vivo comparison of the push-out bond strength of a new endodontic filling system (Smartseal) and various gutta-percha filling techniques.

Authors:  Nikolaos Economides; Christos Gogos; Konstantinos Kodonas; Charilaos Beltes; Ioannis Kolokouris
Journal:  Odontology       Date:  2011-09-24       Impact factor: 2.634

2.  Effect of chemical and Er:YAG laser treatment on bond strength of root canal resin-based sealers.

Authors:  Eduardo Akisue; Angela Toshie Araki; André Luiz Costa Michelotto; Cacio Moura-Netto; Giulio Gavini
Journal:  Lasers Med Sci       Date:  2012-06-19       Impact factor: 3.161

3.  The effect of Er,Cr:YSGG laser irradiation on the push-out bond strength of RealSeal self-etch sealer.

Authors:  Sara Ehsani; Behnam Bolhari; Ardavan Etemadi; Abdollah Ghorbanzadeh; Yazdan Sabet; Ali Nosrat
Journal:  Photomed Laser Surg       Date:  2013-11-09       Impact factor: 2.796

4.  Dislodgement resistance and adhesive pattern of different endodontic sealers to dentine wall after artificial ageing: an in-vitro study.

Authors:  Galvin Sim Siang Lin; Nik Rozainah Nik Abdul Ghani; Tahir Yusuf Noorani; Noor Huda Ismail; Noraida Mamat
Journal:  Odontology       Date:  2020-07-04       Impact factor: 2.634

5.  Evaluation of push-out bond strength of a new MTA-based sealer.

Authors:  I S Sönmez; D Sönmez; M E Almaz
Journal:  Eur Arch Paediatr Dent       Date:  2013-05-04

6.  An in vitro Comparison of Bond Strength of Different Sealers/Obturation Systems to Root Dentin Using the Push-Out Test at 2 Weeks and 3 Months after Obturation.

Authors:  Wai Ying Yap; Zeti Adura Che Ab Aziz; Noor Hayati Azami; Afaf Yahya Al-Haddad; Asfand Ali Khan
Journal:  Med Princ Pract       Date:  2017-09-19       Impact factor: 1.927

7.  The effect of different irrigation protocols for smear layer removal on bond strength of a new bioceramic sealer.

Authors:  Noushin Shokouhinejad; Atefeh Hoseini; Hedayat Gorjestani; Ahmad Reza Shamshiri
Journal:  Iran Endod J       Date:  2013-01-20

8.  An in vitro comparison of bond strengths of Gutta-percha/AH Plus, Resilon/Epiphany self-etch and EndoREZ obturation system to intraradicular dentin using a push-out test design.

Authors:  Sanjana A Patil; Preeti K Dodwad; Avinash A Patil
Journal:  J Conserv Dent       Date:  2013-05

9.  Comparative evaluation of the apical sealing ability and adaptation to dentine of three resin-based sealers: An in vitro study.

Authors:  S Anil Kumar; Vasundhara Shivanna; Mohan Thomas Naian; Gb Shivamurthy
Journal:  J Conserv Dent       Date:  2011-01

10.  The effect of calcium hydroxide on the bond strength of resilon/epiphany self-etch and assessment of calcium hydroxide removal techniques: an ex-vivo study.

Authors:  B Bolhari; N Shokouhinejad; A Masoudi
Journal:  J Dent (Tehran)       Date:  2012-06-30
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.