Literature DB >> 23645545

Evaluation of push-out bond strength of a new MTA-based sealer.

I S Sönmez1, D Sönmez, M E Almaz.   

Abstract

AIM: To evaluate the push-out bond strength of MTA Fillapex (Angelus) and compare it with ProRoot MTA (Dentsply) and AH Plus (Dentsply).
DESIGN: Thirty extracted single-rooted teeth were selected and prepared using a rotary system. The samples were divided randomly into three groups (n = 10) and obturated, respectively, with: (1) AH Plus + gutta-percha (DiaDent); (2) MTA Fillapex + gutta-percha; (3) ProRoot MTA. Each root was sectioned into 1-mm-thick slices and 30 samples for each group were obtained. The samples were subjected to push-out test. Failure modes were examined under 30× magnification. The results were analysed statistically by one-way ANOVA and Tukey's test.
RESULTS: Mean push-out bond strength values were ranked as follows: ProRoot MTA > AH Plus > MTA Fillapex. Statistically significant differences were found among all groups (p < 0.05).
CONCLUSION: ProRoot MTA had the highest bond strength, whilst MTA Fillapex displayed the lowest values among the groups.

Mesh:

Substances:

Year:  2013        PMID: 23645545     DOI: 10.1007/s40368-013-0039-2

Source DB:  PubMed          Journal:  Eur Arch Paediatr Dent        ISSN: 1818-6300


  26 in total

1.  In vitro evaluation of apical microleakage following canal filling with a coated carrier system compared with lateral and thermomechanical Gutta-Percha condensation techniques.

Authors:  F Boussetta; S Bal; A Romeas; G Boivin; H Magloire; P Farge
Journal:  Int Endod J       Date:  2003-05       Impact factor: 5.264

2.  Evaluation of the influence of smear layer on the apical and coronal sealing ability of two sealers.

Authors:  Funda Kont Cobankara; Necdet Adanr; Sema Belli
Journal:  J Endod       Date:  2004-06       Impact factor: 4.171

3.  Effect of acidic environment on the push-out bond strength of mineral trioxide aggregate.

Authors:  Noushin Shokouhinejad; Mohammad Hossein Nekoofar; Azita Iravani; Mohammad Javad Kharrazifard; Paul M H Dummer
Journal:  J Endod       Date:  2010-02-21       Impact factor: 4.171

4.  Effect of blood contamination on retention characteristics of MTA when mixed with different liquids.

Authors:  Richard A Vanderweele; Scott A Schwartz; Thomas J Beeson
Journal:  J Endod       Date:  2006-05       Impact factor: 4.171

5.  Comparison of seal after obturation techniques using a polydimethylsiloxane-based root canal sealer.

Authors:  Martha G Brackett; Rebecca Martin; Jeremy Sword; Cindy Oxford; Frederick A Rueggeberg; Franklin R Tay; David H Pashley
Journal:  J Endod       Date:  2006-10-13       Impact factor: 4.171

6.  An in vitro comparison of the intraradicular dentin bond strength of Resilon and gutta-percha.

Authors:  Lance J Skidmore; David W Berzins; James K Bahcall
Journal:  J Endod       Date:  2006-07-03       Impact factor: 4.171

7.  Push-out bond strengths of the dentine-sealer interface with and without a main cone.

Authors:  A Jainaen; J E A Palamara; H H Messer
Journal:  Int Endod J       Date:  2007-09-18       Impact factor: 5.264

8.  Push-out bond strength and SEM evaluation of new polymeric root canal fillings.

Authors:  Emel Olga Onay; Mete Ungor; Hale Ari; Sema Belli; Ersin Ogus
Journal:  Oral Surg Oral Med Oral Pathol Oral Radiol Endod       Date:  2009-04-22

9.  Evaluation of setting properties and retention characteristics of mineral trioxide aggregate when used as a furcation perforation repair material.

Authors:  S R Sluyk; P C Moon; G R Hartwell
Journal:  J Endod       Date:  1998-11       Impact factor: 4.171

Review 10.  Mineral trioxide aggregate material use in endodontic treatment: a review of the literature.

Authors:  Howard W Roberts; Jeffrey M Toth; David W Berzins; David G Charlton
Journal:  Dent Mater       Date:  2007-06-21       Impact factor: 5.304

View more
  7 in total

1.  Push-Out Bond Strength of Dorifill, Epiphany and MTA-Fillapex Sealers to Root Canal Dentin with and without Smear Layer.

Authors:  Mohammad Forough Reyhani; Negin Ghasemi; Saeed Rahimi; Amin Salem Milani; Hadi Mokhtari; Sahar Shakouie; Hossein Safarvand
Journal:  Iran Endod J       Date:  2014-10-07

2.  The effect of different root canal sealers on the fracture resistance of endodontically treated teeth-in vitro study.

Authors:  Anuve Hrishi Phukan; Shivani Mathur; Meera Sandhu; Vinod Sachdev
Journal:  Dent Res J (Isfahan)       Date:  2017 Nov-Dec

3.  In vitro evaluation of the contact angle formed between AH Plus, Hybrid Root Seal and mineral trioxide aggregate Plus sealer with dentin and gutta-percha.

Authors:  Vineeta Nikhil; Shikha Jaiswal; Gauravi Bajpai
Journal:  J Conserv Dent       Date:  2018 Mar-Apr

4.  Push-Out Bond Strength of Experimental Apatite Calcium Phosphate Based Coated Gutta-Percha.

Authors:  Afaf Y Al-Haddad; Muralithran G Kutty; Zeti Adura Che Ab Aziz
Journal:  Int J Biomater       Date:  2018-08-01

5.  The Influence of Humidity on Intra-tubular Penetration and Bond Strength of AH Plus and MTA Fillapex: An In Vitro Study.

Authors:  Bruno Piazza; Melissa Esther Rivera-Peña; Murilo Priori Alcalde; Bruno Carvalho de Vasconcelos; Marco Antonio Húngaro Duarte; Ivaldo Gomes de Moraes; Rodrigo Ricci Vivan
Journal:  Eur Endod J       Date:  2017-12-22

6.  Effect of Different Endodontic Sealers on the Push-out Bond Strength of Fiber Posts.

Authors:  Mohammad Forough Reyhani; Negin Ghasemi; Saeed Rahimi; Amin Salem Milani; Elnaz Omrani
Journal:  Iran Endod J       Date:  2016-03-20

7.  The effect of photodynamic therapy and polymer solution containing nano-particles of Ag /ZnO on push-out bond strength of the sealers AH-Plus and MTA Fillapex.

Authors:  Hamidreza Yavari; Negin Ghasemi; Baharak Divband; Yashar Rezaei; Golchin Jabbari; Salar Payahoo
Journal:  J Clin Exp Dent       Date:  2017-09-01
  7 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.