Literature DB >> 16850469

The effect of nanofiller on the opacity of experimental composites.

Jong-Jin Kim1, Hyun-Jung Moon, Bum-Soon Lim, Yong-Keun Lee, Sang-Hoon Rhee, Heong-Cheol Yang.   

Abstract

The purpose of this study was to evaluate the effect of the nanofiller in experimental composites on opacity (contrast ratio). Thirteen experimental composites were prepared with three different sizes of fillers: barium glass minifiller (1 microm; 69-76 wt %), silica microfiller (0.04 microm; 0-6 wt %), and silica nanofiller (7 nm; 0-7 wt %). After disk-type specimens were irradiated with a halogen light curing unit at 500 mW/cm(2) for 30 s, the specimens were aged for 6 h at room conditions and were stored in deionized water for 1, 7, 14, 21, 28, 56, and 84 days. The contrast ratios of the specimens were measured as a function of aging period using a spectrophotometer. The distribution morphology of the filler particles in the resin matrix was also examined using energy-filtering transmission electron microscopy. The experimental composites that contained more than 3% nanofiller had significantly lower contrast ratios (p < 0.05). The composites that contained 6 wt % nanofiller had contrast ratios 34-65% lower than the composite that did not contain nanofiller. The values of the contrast ratio from the composites that excluded microfiller were lower than the values from the composites that included microfiller. From the comparison with the 3 different sizes of filler, the contrast ratio of the composite that contained 70 wt % minifiller and 6 wt % microfiller was the highest, the contrast ratio of the composite that contained only 76 wt % minifiller was the median value, and the contrast ratio of the composite that contained 70 wt % minifiller and 6 wt % nanofiller was the lowest. When the microfiller content was decreased from 6 wt % to 0 wt %, the contrast ratio decreased 6-9%. Energy-filtering transmission electron microscopy images indicated that the contrast ratio of experimental composites is related to the distribution morphology of the filler particles in the resin matrix. (c) 2006 Wiley Periodicals, Inc.

Entities:  

Mesh:

Substances:

Year:  2007        PMID: 16850469     DOI: 10.1002/jbm.b.30601

Source DB:  PubMed          Journal:  J Biomed Mater Res B Appl Biomater        ISSN: 1552-4973            Impact factor:   3.368


  8 in total

1.  Effect of staining solutions on discoloration of resin nanocomposites.

Authors:  Jeong-Kil Park; Tae-Hyong Kim; Ching-Chang Ko; Franklin García-Godoy; Hyung-Il Kim; Yong Hoon Kwon
Journal:  Am J Dent       Date:  2010-02       Impact factor: 1.522

2.  Depth of cure and mechanical properties of nano-hybrid resin-based composites with novel and conventional matrix formulation.

Authors:  Karina E Frauscher; Nicoleta Ilie
Journal:  Clin Oral Investig       Date:  2011-12-02       Impact factor: 3.573

3.  Degree of conversion of nano-hybrid resin-based composites with novel and conventional matrix formulation.

Authors:  Karina E Frauscher; Nicoleta Ilie
Journal:  Clin Oral Investig       Date:  2012-05-03       Impact factor: 3.573

4.  Depth of Cure, Hardness, Roughness and Filler Dimension of Bulk-Fill Flowable, Conventional Flowable and High-Strength Universal Injectable Composites: An In Vitro Study.

Authors:  Francesco Saverio Ludovichetti; Patrizia Lucchi; Giulia Zambon; Luca Pezzato; Rachele Bertolini; Nicoletta Zerman; Edoardo Stellini; Sergio Mazzoleni
Journal:  Nanomaterials (Basel)       Date:  2022-06-07       Impact factor: 5.719

5.  Non-silicate nanoparticles for improved nanohybrid resin composites.

Authors:  Leina Nakanishi; Marina R Kaizer; Suzane Brandeburski; Sergio S Cava; Alvaro Della Bona; Yu Zhang; Rafael R Moraes
Journal:  Dent Mater       Date:  2020-08-03       Impact factor: 5.304

6.  Influence of opacifiers on dimensional stability and detail reproduction of maxillofacial silicone elastomer.

Authors:  Marcelo C Goiato; Marcela F Haddad; Mário A C Sinhoreti; Daniela M dos Santos; Aldiéris A Pesqueira; Amália Moreno
Journal:  Biomed Eng Online       Date:  2010-12-16       Impact factor: 2.819

7.  Effect of zirconium oxide nanoparticles addition on the optical and tensile properties of polymethyl methacrylate denture base material.

Authors:  Mohammed M Gad; Reem Abualsaud; Ahmed Rahoma; Ahmad M Al-Thobity; Khalid S Al-Abidi; Sultan Akhtar
Journal:  Int J Nanomedicine       Date:  2018-01-09

8.  The Effects of Irradiance on Translucency and Surface Gloss of Different Bulk-Fill Composite Resins: An in vitro Study.

Authors:  Abrar N Bin Nooh; Hend Al Nahedh; Mohammad AlRefeai; Fahad AlKhudhairy
Journal:  Clin Cosmet Investig Dent       Date:  2020-12-08
  8 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.