Literature DB >> 16701828

Synthesis of biocompatible segmented polyurethanes from aliphatic diisocyanates and diurea diol chain extenders.

Scott A Guelcher1, Katie M Gallagher, Jonathan E Didier, Derek B Klinedinst, John S Doctor, Aaron S Goldstein, Garth L Wilkes, Eric J Beckman, Jeffrey O Hollinger.   

Abstract

Many polyurethane elastomers display excellent mechanical properties and adequate biocompatibility. However, many medical-grade polyurethanes are prepared from aromatic diisocyanates and can degrade in vivo to carcinogenic aromatic diamines, although the question of whether the concentrations of these harmful degradation products attain physiologically relevant levels is currently unresolved and strongly debated. It is therefore desirable to synthesize new medical-grade polyurethanes from less toxic aliphatic diisocyanates. In this paper, biocompatible segmented polyurethane elastomers were synthesized from aliphatic diisocyanates (1,4-diisocyanatobutane (BDI) and lysine methyl ester diisocyanate (LDI)), novel diurea diol chain extenders based on tyrosine and tyramine, and a model poly(ethylene glycol) (PEG) diol soft segment. The objectives were to design a hard segment similar in structure to that of MDI-based polyurethanes and also investigate the effects of systematic changes in structure on mechanical and biological properties. The non-branched, symmetric polyurethane prepared from BDI and a tyramine-based chain extender had the highest modulus at 37 degrees C. Introduction of symmetric short-chain branches (SCBs) incorporated in the tyrosine-based chain extender lowered the modulus by an order of magnitude. Polyurethanes prepared from LDI were soft polymers that had a still lower modulus due to the asymmetric SCBs that hindered hard segment packing. Polyurethanes prepared from tyramine and tyrosine chain extenders thermally degraded at temperatures ranging from 110 to 150 degrees C, which are lower than that reported previously for phenyl urethanes. All four polyurethanes supported the attachment, proliferation, and high viability of MG-63 human osteoblast-like cells in vitro. Therefore, the non-cytotoxic chemistry of these polyurethanes make them good candidates for further development as biomedical implants.

Entities:  

Mesh:

Substances:

Year:  2005        PMID: 16701828     DOI: 10.1016/j.actbio.2005.02.007

Source DB:  PubMed          Journal:  Acta Biomater        ISSN: 1742-7061            Impact factor:   8.947


  22 in total

1.  Biodegradable polyurethane ureas with variable polyester or polycarbonate soft segments: effects of crystallinity, molecular weight, and composition on mechanical properties.

Authors:  Zuwei Ma; Yi Hong; Devin M Nelson; Joseph E Pichamuthu; Cory E Leeson; William R Wagner
Journal:  Biomacromolecules       Date:  2011-07-26       Impact factor: 6.988

2.  Computational predictions of the tensile properties of electrospun fibre meshes: effect of fibre diameter and fibre orientation.

Authors:  Triantafyllos Stylianopoulos; Chris A Bashur; Aaron S Goldstein; Scott A Guelcher; Victor H Barocas
Journal:  J Mech Behav Biomed Mater       Date:  2008-01-25

Review 3.  25th anniversary article: Rational design and applications of hydrogels in regenerative medicine.

Authors:  Nasim Annabi; Ali Tamayol; Jorge Alfredo Uquillas; Mohsen Akbari; Luiz E Bertassoni; Chaenyung Cha; Gulden Camci-Unal; Mehmet R Dokmeci; Nicholas A Peppas; Ali Khademhosseini
Journal:  Adv Mater       Date:  2014-01-08       Impact factor: 30.849

4.  Cell layer-electrospun mesh composites for coronary artery bypass grafts.

Authors:  Josh D Erndt-Marino; Silvia Becerra-Bayona; Rebecca E McMahon; Aaron S Goldstein; Mariah S Hahn
Journal:  J Biomed Mater Res A       Date:  2016-05-04       Impact factor: 4.396

5.  Biocompatible, degradable thermoplastic polyurethane based on polycaprolactone-block-polytetrahydrofuran-block-polycaprolactone copolymers for soft tissue engineering.

Authors:  Hao-Yang Mi; Xin Jing; Brett N Napiwocki; Breanna S Hagerty; Guojun Chen; Lih-Sheng Turng
Journal:  J Mater Chem B       Date:  2017-05-01       Impact factor: 6.331

6.  Tailoring the degradation kinetics of poly(ester carbonate urethane)urea thermoplastic elastomers for tissue engineering scaffolds.

Authors:  Yi Hong; Jianjun Guan; Kazuro L Fujimoto; Ryotaro Hashizume; Anca L Pelinescu; William R Wagner
Journal:  Biomaterials       Date:  2010-02-25       Impact factor: 12.479

7.  In Situ Synthesis of Polyurethane Scaffolds with Tunable Properties by Controlled Crosslinking of Tri-Block Copolymer and Polycaprolactone Triol for Tissue Regeneration.

Authors:  Hao-Yang Mi; Xin Jing; Galip Yilmaz; Breanna S Hagerty; Eduardo Enriquez; Lih-Sheng Turng
Journal:  Chem Eng J       Date:  2018-04-30       Impact factor: 13.273

8.  Effect of the hard segment chemistry and structure on the thermal and mechanical properties of novel biomedical segmented poly(esterurethanes).

Authors:  P C Caracciolo; F Buffa; G A Abraham
Journal:  J Mater Sci Mater Med       Date:  2008-08-14       Impact factor: 3.896

9.  Synthesis and characterization of segmented poly(esterurethane urea) elastomers for bone tissue engineering.

Authors:  Katherine D Kavlock; Todd W Pechar; Jeffrey O Hollinger; Scott A Guelcher; Aaron S Goldstein
Journal:  Acta Biomater       Date:  2007-04-05       Impact factor: 8.947

Review 10.  Recent advances in synthetic bioelastomers.

Authors:  Rui Shi; Dafu Chen; Quanyong Liu; Yan Wu; Xiaochuan Xu; Liqun Zhang; Wei Tian
Journal:  Int J Mol Sci       Date:  2009-11-20       Impact factor: 6.208

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.