Literature DB >> 16549092

Multiscale modelling in biofluidynamics: application to reconstructive paediatric cardiac surgery.

Francesco Migliavacca1, Rossella Balossino, Giancarlo Pennati, Gabriele Dubini, Tain-Yen Hsia, Marc R de Leval, Edward L Bove.   

Abstract

Multiscale computing is a challenging area even in biomechanics. Application of such a methodology to quantitatively compare postoperative hemodynamics in congenital heart diseases is very promising. In the treatment of hypoplastic left heart syndrome, which is a congenital heart disease where the left ventricle is missing or very small, the necessity to feed the pulmonary and systemic circulations is obtained with an interposition shunt. Two main options are available and differ from the sites of anastomoses: (i) the systemic-to-pulmonary conduit (Blalock-Taussig shunt known as the Norwood Operation (NO)) connecting the innominate artery (NO-BT) or the aorta (NO-CS) to the right pulmonary artery and (ii) the right ventricle to pulmonary artery shunt (known as Sano operation (SO)). The proposition that the SO is superior to the NO remains controversial. 3-D computer models of the NO (NO-BT and NO-CS) and SO were developed and investigated using the finite volume method. Conduits of 3, 3.5 and 4 mm were used in the NO models, whereas conduits of 4, 5 and 6 mm were used in the SO model. The hydraulic nets (lumped resistances, compliances, inertances and elastances) which represent the systemic, coronary and pulmonary circulations and the heart were identical in the two models. A multiscale approach was adopted to couple the 3-D models with the circulation net. Computer simulation results were compared with post-operative catheterization data. Results showed that (i) there is a good correlation between predicted and observed data: higher aortic diastolic pressure, decreased pulmonary arterial pressure, lower pulmonary-to-systemic flow ratio and higher coronary perfusion pressure in SO; (ii) there is a minimal regurgitant flow in the SO conduit. The close correlation between predicted and observed clinical data supports the use of mathematical modelling, with a mandatory multiscale approach, in the design and assessment of surgical procedures.

Entities:  

Mesh:

Year:  2005        PMID: 16549092     DOI: 10.1016/j.jbiomech.2005.02.021

Source DB:  PubMed          Journal:  J Biomech        ISSN: 0021-9290            Impact factor:   2.712


  26 in total

1.  Boundary conditions of patient-specific fluid dynamics modelling of cavopulmonary connections: possible adaptation of pulmonary resistances results in a critical issue for a virtual surgical planning.

Authors:  Giancarlo Pennati; Chiara Corsini; Daria Cosentino; Tain-Yen Hsia; Vincenzo S Luisi; Gabriele Dubini; Francesco Migliavacca
Journal:  Interface Focus       Date:  2011-03-09       Impact factor: 3.906

Review 2.  Patient-specific modeling of cardiovascular mechanics.

Authors:  C A Taylor; C A Figueroa
Journal:  Annu Rev Biomed Eng       Date:  2009       Impact factor: 9.590

3.  In vitro hemodynamic investigation of the embryonic aortic arch at late gestation.

Authors:  Kerem Pekkan; Lakshmi P Dasi; Paymon Nourparvar; Srinivasu Yerneni; Kimimasa Tobita; Mark A Fogel; Bradley Keller; Ajit Yoganathan
Journal:  J Biomech       Date:  2008-05-07       Impact factor: 2.712

4.  Computational modeling of pathophysiologic responses to exercise in Fontan patients.

Authors:  Ethan Kung; James C Perry; Christopher Davis; Francesco Migliavacca; Giancarlo Pennati; Alessandro Giardini; Tain-Yen Hsia; Alison Marsden
Journal:  Ann Biomed Eng       Date:  2014-09-27       Impact factor: 3.934

5.  Effect of stenosis eccentricity on the functionality of coronary bifurcation lesions-a numerical study.

Authors:  Catherine Pagiatakis; Jean-Claude Tardif; Philippe L L'Allier; Rosaire Mongrain
Journal:  Med Biol Eng Comput       Date:  2017-05-13       Impact factor: 2.602

6.  In vitro validation of finite-element model of AAA hemodynamics incorporating realistic outlet boundary conditions.

Authors:  Ethan O Kung; Andrea S Les; Francisco Medina; Ryan B Wicker; Michael V McConnell; Charles A Taylor
Journal:  J Biomech Eng       Date:  2011-04       Impact factor: 2.097

7.  Rat airway morphometry measured from in situ MRI-based geometric models.

Authors:  Jessica M Oakes; Miriam Scadeng; Ellen C Breen; Alison L Marsden; Chantal Darquenne
Journal:  J Appl Physiol (1985)       Date:  2012-03-29

8.  Heterogeneous mechanics of the mouse pulmonary arterial network.

Authors:  Pilhwa Lee; Brian E Carlson; Naomi Chesler; Mette S Olufsen; M Umar Qureshi; Nicolas P Smith; Taha Sochi; Daniel A Beard
Journal:  Biomech Model Mechanobiol       Date:  2016-01-20

9.  Lagrangian analysis of hemodynamics data from FSI simulation.

Authors:  Vincent Duvernois; Alison L Marsden; Shawn C Shadden
Journal:  Int J Numer Method Biomed Eng       Date:  2012-10-18       Impact factor: 2.747

10.  Adaptation and development of software simulation methodologies for cardiovascular engineering: present and future challenges from an end-user perspective.

Authors:  V Díaz-Zuccarini; A J Narracott; G Burriesci; C Zervides; D Rafiroiu; D Jones; D R Hose; P V Lawford
Journal:  Philos Trans A Math Phys Eng Sci       Date:  2009-07-13       Impact factor: 4.226

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.