Literature DB >> 16529408

Novel living cell sheet harvest system composed of thermoreversible methylcellulose hydrogels.

Chun-Hung Chen1, Chen-Chi Tsai, Wannhsin Chen, Fwu-Long Mi, Hsiang-Fa Liang, Sung-Ching Chen, Hsing-Wen Sung.   

Abstract

In this study, a novel yet simple method, using a thermoreversible hydrogel system coated on tissue culture polystyrene (TCPS) dishes, was developed for harvesting living cell sheets. The hydrogel system was prepared by simply pouring aqueous methylcellulose (MC) solutions blended with distinct salts on TCPS dishes at 20 degrees C. For the applications to cell culture, only those aqueous MC compositions that may form a gel at 37 degrees C were chosen for the study. It was found that the hydrogel coating composed of 8% MC blended with 10 g/L PBS (phosphate buffered saline) (the MC/PBS hydrogel, with a gelation temperature of approximately 25 degrees C) stayed intact throughout the entire course of cell culture. To improve cell attachments, the MC/PBS hydrogel at 37 degrees C was evenly spread with a neutral aqueous collagen at 4 degrees C. The spread aqueous collagen gradually reconstituted with time and thus formed a thin layer of collagen (the MC/PBS/collagen hydrogel). After cells reached confluence, a continuous monolayer cell sheet formed on the surface of the MC/PBS/collagen hydrogel. When the grown cell sheet was placed outside of the incubator at 20 degrees C, it detached gradually from the surface of the thermoreversible hydrogel spontaneously, without treating with any enzymes. The results obtained in the MTT assay demonstrated that the cells cultured on the surface of the MC/PBS/collagen hydrogel had an even better activity than those cultured on an uncoated TCPS dish. After harvesting the detached cell sheet, the remaining viscous hydrogel system is reusable. Additionally, the developed hydrogel system can be used for culturing a multilayer cell sheet. The obtained living cell sheets may be used for tissue reconstructions.

Entities:  

Mesh:

Substances:

Year:  2006        PMID: 16529408     DOI: 10.1021/bm0506400

Source DB:  PubMed          Journal:  Biomacromolecules        ISSN: 1525-7797            Impact factor:   6.988


  16 in total

1.  Fabrication and characterization of cell sheets using methylcellulose and PNIPAAm thermoresponsive polymers: A comparison Study.

Authors:  Anoosha Forghani; Lisa Kriegh; Katie Hogan; Cong Chen; Gabrielle Brewer; Timothy B Tighe; Ram Devireddy; Daniel Hayes
Journal:  J Biomed Mater Res A       Date:  2017-02-24       Impact factor: 4.396

2.  Vitamin C treatment promotes mesenchymal stem cell sheet formation and tissue regeneration by elevating telomerase activity.

Authors:  Fulan Wei; Cunye Qu; Tieli Song; Gang Ding; Zhipeng Fan; Dayong Liu; Yi Liu; Chunmei Zhang; Songtao Shi; Songlin Wang
Journal:  J Cell Physiol       Date:  2012-09       Impact factor: 6.384

3.  Thermo-responsive methylcellulose hydrogels as temporary substrate for cell sheet biofabrication.

Authors:  Lina Altomare; Andrea Cochis; Andrea Carletta; Lia Rimondini; Silvia Farè
Journal:  J Mater Sci Mater Med       Date:  2016-03-16       Impact factor: 3.896

4.  Norbornene-functionalized methylcellulose as a thermo- and photo-responsive bioink.

Authors:  Min Hee Kim; Chien-Chi Lin
Journal:  Biofabrication       Date:  2021-09-21       Impact factor: 11.061

Review 5.  Biomaterials for vascular tissue engineering.

Authors:  Swathi Ravi; Elliot L Chaikof
Journal:  Regen Med       Date:  2010-01       Impact factor: 3.806

6.  Partitioning microfluidic channels with hydrogel to construct tunable 3-D cellular microenvironments.

Authors:  Amy P Wong; Raquel Perez-Castillejos; J Christopher Love; George M Whitesides
Journal:  Biomaterials       Date:  2008-02-19       Impact factor: 12.479

7.  Mesenchymal Stem Cell Sheets for Engineering of the Tendon-Bone Interface.

Authors:  Lisa Berntsen; Anoosha Forghani; Daniel J Hayes
Journal:  Tissue Eng Part A       Date:  2022-01-04       Impact factor: 4.080

8.  Sol-Gel Behavior of Hydroxypropyl Methylcellulose (HPMC) in Ionic Media Including Drug Release.

Authors:  Sunil C Joshi
Journal:  Materials (Basel)       Date:  2011-10-24       Impact factor: 3.623

9.  Methylcellulose based thermally reversible hydrogel system for tissue engineering applications.

Authors:  Sreedhar Thirumala; Jeffrey M Gimble; Ram V Devireddy
Journal:  Cells       Date:  2013-06-25       Impact factor: 6.600

10.  3D Printing of Thermo-Responsive Methylcellulose Hydrogels for Cell-Sheet Engineering.

Authors:  Andrea Cochis; Lorenzo Bonetti; Rita Sorrentino; Nicola Contessi Negrini; Federico Grassi; Massimiliano Leigheb; Lia Rimondini; Silvia Farè
Journal:  Materials (Basel)       Date:  2018-04-10       Impact factor: 3.623

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.