Literature DB >> 16369802

Rapid vessel prototyping: vascular modeling using 3t magnetic resonance angiography and rapid prototyping technology.

Michael Markl1, Ralf Schumacher, Jürg Küffer, Thorsten A Bley, Jürgen Hennig.   

Abstract

OBJECT: Conversion of thoracic aortic vasculature as measured by Magnetic Resonance Imaging into a real physical replica.
MATERIALS AND METHODS: Several procedural steps including data acquisition with contrast enhanced MR Angiography at 3T, data visualization and 3D computer model generation, as well as rapid prototyping were used to construct an in-vitro model of the vessel geometry.
RESULTS: A rapid vessel prototyping process was implemented and used to convert complex vascular geometry of the entire thoracic aorta and major branching arteries into a real physical replica with large anatomical coverage and high spatial resolution.
CONCLUSION: Rapid vessel prototyping permits the creation of a concrete solid replica of a patient's vascular anatomy.

Entities:  

Mesh:

Year:  2005        PMID: 16369802     DOI: 10.1007/s10334-005-0019-6

Source DB:  PubMed          Journal:  MAGMA        ISSN: 0968-5243            Impact factor:   2.310


  16 in total

1.  SENSE: sensitivity encoding for fast MRI.

Authors:  K P Pruessmann; M Weiger; M B Scheidegger; P Boesiger
Journal:  Magn Reson Med       Date:  1999-11       Impact factor: 4.668

2.  Quantitative analysis of vascular morphology from 3D MR angiograms: In vitro and in vivo results.

Authors:  A F Frangi; W J Niessen; P J Nederkoorn; J Bakker; W P Mali; M A Viergever
Journal:  Magn Reson Med       Date:  2001-02       Impact factor: 4.668

3.  Computer aided design and fabrication of models for in vitro studies of vascular fluid dynamics.

Authors:  C K Chong; C S Rowe; S Sivanesan; A Rattray; R A Black; A P Shortland; T V How
Journal:  Proc Inst Mech Eng H       Date:  1999       Impact factor: 1.617

4.  Generalized autocalibrating partially parallel acquisitions (GRAPPA).

Authors:  Mark A Griswold; Peter M Jakob; Robin M Heidemann; Mathias Nittka; Vladimir Jellus; Jianmin Wang; Berthold Kiefer; Axel Haase
Journal:  Magn Reson Med       Date:  2002-06       Impact factor: 4.668

Review 5.  Parallel imaging at high field strength: synergies and joint potential.

Authors:  Klaas P Pruessmann
Journal:  Top Magn Reson Imaging       Date:  2004-08

6.  Spiral magnetic resonance coronary angiography--direct comparison of 1.5 Tesla vs. 3 Tesla.

Authors:  Phillip C Yang; Patricia Nguyen; Ann Shimakawa; Jean Brittain; John Pauly; Dwight Nishimura; Bob Hu; Michael McConnell
Journal:  J Cardiovasc Magn Reson       Date:  2004       Impact factor: 5.364

7.  Stereolithographic vascular replicas from CT scans: choosing treatment strategies, teaching, and research from live patient scan data.

Authors:  Kimberly Knox; Charles W Kerber; Soren A Singel; Michael J Bailey; Steven G Imbesi
Journal:  AJNR Am J Neuroradiol       Date:  2005 Jun-Jul       Impact factor: 3.825

8.  Integration of 3-D medical imaging and rapid prototyping to create stereolithographic models.

Authors:  T M Barker; W J Earwaker; N Frost; G Wakeley
Journal:  Australas Phys Eng Sci Med       Date:  1993-06       Impact factor: 1.430

9.  Gadolinium-enhanced magnetic resonance angiography of abdominal aortic aneurysms.

Authors:  M R Prince; D L Narasimham; J C Stanley; T W Wakefield; L M Messina; G B Zelenock; W T Jacoby; M V Marx; D M Williams; K J Cho
Journal:  J Vasc Surg       Date:  1995-04       Impact factor: 4.268

Review 10.  MR contrast agent at high-field MRI (3 Tesla).

Authors:  Siegfried Trattnig; Ahmed Ba-Ssalamah; Iris-Melanie Noebauer-Huhmann; Markus Barth; Stefan Wolfsberger; Katja Pinker; Engelbert Knosp
Journal:  Top Magn Reson Imaging       Date:  2003-10
View more
  13 in total

Review 1.  Medical 3D Printing for the Radiologist.

Authors:  Dimitris Mitsouras; Peter Liacouras; Amir Imanzadeh; Andreas A Giannopoulos; Tianrun Cai; Kanako K Kumamaru; Elizabeth George; Nicole Wake; Edward J Caterson; Bohdan Pomahac; Vincent B Ho; Gerald T Grant; Frank J Rybicki
Journal:  Radiographics       Date:  2015 Nov-Dec       Impact factor: 5.333

2.  Applications of three-dimensional printing technology in the cardiovascular field.

Authors:  Di Shi; Kai Liu; Xin Zhang; Hang Liao; Xiaoping Chen
Journal:  Intern Emerg Med       Date:  2015-07-29       Impact factor: 3.397

3.  3D Printed Abdominal Aortic Aneurysm Phantom for Image Guided Surgical Planning with a Patient Specific Fenestrated Endovascular Graft System.

Authors:  Karen M Meess; Richard L Izzo; Maciej L Dryjski; Richard E Curl; Linda M Harris; Michael Springer; Adnan H Siddiqui; Stephen Rudin; Ciprian N Ionita
Journal:  Proc SPIE Int Soc Opt Eng       Date:  2017-03-13

4.  Generation of three-dimensional prototype models based on cone beam computed tomography.

Authors:  J Th Lambrecht; D C Berndt; R Schumacher; M Zehnder
Journal:  Int J Comput Assist Radiol Surg       Date:  2008-11-15       Impact factor: 2.924

Review 5.  3D Bioprinting of cardiac tissue and cardiac stem cell therapy.

Authors:  Matthew Alonzo; Shweta AnilKumar; Brian Roman; Nishat Tasnim; Binata Joddar
Journal:  Transl Res       Date:  2019-04-20       Impact factor: 7.012

6.  Three-dimensional printing of MRI-visible phantoms and MR image-guided therapy simulation.

Authors:  Dimitris Mitsouras; Thomas C Lee; Peter Liacouras; Ciprian N Ionita; Todd Pietilla; Stephan E Maier; Robert V Mulkern
Journal:  Magn Reson Med       Date:  2016-02-11       Impact factor: 4.668

Review 7.  Applications of 3D printing in cardiovascular diseases.

Authors:  Andreas A Giannopoulos; Dimitris Mitsouras; Shi-Joon Yoo; Peter P Liu; Yiannis S Chatzizisis; Frank J Rybicki
Journal:  Nat Rev Cardiol       Date:  2016-10-27       Impact factor: 32.419

Review 8.  Cardiac 3D Printing and its Future Directions.

Authors:  Marija Vukicevic; Bobak Mosadegh; James K Min; Stephen H Little
Journal:  JACC Cardiovasc Imaging       Date:  2017-02

9.  Neurovascular modeling: small-batch manufacturing of silicone vascular replicas.

Authors:  J Y Chueh; A K Wakhloo; M J Gounis
Journal:  AJNR Am J Neuroradiol       Date:  2009-03-25       Impact factor: 3.825

Review 10.  Cardiothoracic Applications of 3-dimensional Printing.

Authors:  Andreas A Giannopoulos; Michael L Steigner; Elizabeth George; Maria Barile; Andetta R Hunsaker; Frank J Rybicki; Dimitris Mitsouras
Journal:  J Thorac Imaging       Date:  2016-09       Impact factor: 3.000

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.