Filtering of kinematic signals using the Hodrick-Prescott filter.

The use of the Hodrick-Prescott (HP) filter is presented as an alternative to the traditional digital filtering and spline smoothing methods currently used in biomechanics. In econometrics, HP filtering is a standard tool used to decompose a macroeconomic time series into a nonstationary trend component and a stationary residual component. The use of the HP filter in the present work is based on reasonable assumptions about the jerk and noise components of the raw displacement signal. Its applicability was tested on 4 kinematic signals with different characteristics. Two are well known signals taken from the literature on biomechanical signal filtering, and the other two were acquired with our own motion capture system. The criterion for the selection of cutoff frequency was based on the power spectral density of the raw displacement signals. The results showed the technique to be well suited to filtering biomechanical displacement signals in order to obtain accurate higher derivatives in a simple and systematic way. Namely, the HP filter and the generalized cross-validated quintic spline (GCVSPL) produce similar RMS errors on the first (0.1063 vs. 0.1024 m/s2) and second (23.76 vs. 23.24 rad/s2) signals. The HP filter performs slightly better than GCVSPL on the third (0.209 vs. 0.236 m/s2) and fourth (1.596 vs. 2.315 m/s2) signals.