Literature DB >> 16182922

Surface properties of endosseous dental implants after NdYAG and CO2 laser treatment at various energies.

Cheung-Yeoul Park1, Su-Gwan Kim, Myung-Duck Kim, Tae-Gwan Eom, Jung-Hoon Yoon, Sang-Gun Ahn.   

Abstract

OBJECTIVES: Dental lasers have been used for uncovering submerged implants as well as decontaminating implant surfaces when treating peri-implantitis. The objective of this study was to compare the possible alterations of the smooth surface and resorbable blast material (RBM) surface implants after using NdYAG and CO(2) lasers at various energies.
MATERIALS AND METHODS: Ten smooth surface implants and 10 RBM surface implants were used. Two smooth surface implants and 2 RBM surface implants served as a control group that was not lased. The remaining implants were treated using NdYAG and CO(2) lasers. The surface of each implant was treated for 10 seconds on the second and third threads. The smooth surface implants (group 1) were treated using a pulsed contact NdYAG laser at power settings of 1, 2, 3.5, and 5 W, which are commonly used for soft tissue surgery; the corresponding energy and frequency were 50 mJ and 20 Hz, 100 mJ and 20 Hz, 350 mJ and 10 Hz, and 250 mJ and 20 Hz, respectively. The group 2 RBM implants were treated using a pulsed contact NdYAG laser. The group 3 smooth surface implants were treated using a pulsed wave non-contact CO(2) laser at 1, 2, 3.5, and 5 W, and the group 4 RBM implants were treated using a pulsed wave non-contact CO(2) laser. Data were analyzed using scanning electron microscopy.
RESULTS: The control surface was very regular and smooth. After NdYAG laser treatment, the implant surface showed alterations of all the surfaces. The amount of damage was proportional to the power. A remarkable finding was the similarity of the lased areas on the smooth and RBM surfaces. CO(2) laser at power settings of 1.0 or 2.0 W did not alter the implant surface, regardless of implant type. At settings of 3.5 and 5 W, there was destruction of the micromachined groove and gas formation.
CONCLUSION: This study supports that CO(2) laser treatment appears more useful than NdYAG laser treatment and CO(2) laser does not damage titanium implant surface, which should be of value when uncovering submerged implants and treating peri-implantitis.

Entities:  

Mesh:

Substances:

Year:  2005        PMID: 16182922     DOI: 10.1016/j.joms.2005.06.015

Source DB:  PubMed          Journal:  J Oral Maxillofac Surg        ISSN: 0278-2391            Impact factor:   1.895


  12 in total

Review 1.  Laser applications in oral surgery and implant dentistry.

Authors:  Herbert Deppe; Hans-Henning Horch
Journal:  Lasers Med Sci       Date:  2007-02-01       Impact factor: 3.161

2.  An in vitro evaluation of the responses of human osteoblast-like SaOs-2 cells on SLA titanium surfaces irradiated by different powers of CO2 lasers.

Authors:  Nader Ayubianmarkazi; Mohammadreza Karimi; Shima Koohkan; Armand Sanasa; Tahereh Foroutan
Journal:  Lasers Med Sci       Date:  2015-05-10       Impact factor: 3.161

3.  Thermodynamic effects of laser irradiation of implants placed in bone: an in vitro study.

Authors:  Chris Leja; Alessandro Geminiani; Jack Caton; Georgios E Romanos
Journal:  Lasers Med Sci       Date:  2012-10-10       Impact factor: 3.161

4.  Different laser wavelengths comparison in the second-stage implant surgery: an ex vivo study.

Authors:  Carlo Fornaini; Elisabetta Merigo; Paolo Vescovi; Mauro Bonanini; Walter Antonietti; Luca Leoci; Giuseppe Lagori; Marco Meleti
Journal:  Lasers Med Sci       Date:  2014-07-03       Impact factor: 3.161

5.  CO2 laser surface treatment of failed dental implants for re-implantation: an animal study.

Authors:  Shahin Kasraei; Parviz Torkzaban; Bahar Shams; Seyed Mohammad Hosseinipanah; Maryam Farhadian
Journal:  Lasers Med Sci       Date:  2016-04-28       Impact factor: 3.161

6.  Effect of 308-nm excimer laser light on peri-implantitis-associated bacteria: an in vitro investigation.

Authors:  Herbert Deppe; Hans-Henning Horch; Veit Schrödl; Cornelia Haczek; Thomas Miethke
Journal:  Lasers Med Sci       Date:  2007-02-21       Impact factor: 3.161

7.  The Effect of Carbon Dioxide (CO2) Laser on Sandblasting with Large Grit and Acid Etching (SLA) Surface.

Authors:  Tahereh Foroutan; Nader Ayoubian
Journal:  J Lasers Med Sci       Date:  2013

8.  Advantages and esthetic results of erbium, chromium:yttrium-scandium-gallium-garnet laser application in second-stage implant surgery in patients with insufficient gingival attachment: a report of three cases.

Authors:  Josep Arnabat-Domínguez; Mercedes Bragado-Novel; Antonio Jesús España-Tost; Leonardo Berini-Aytés; Cosme Gay-Escoda
Journal:  Lasers Med Sci       Date:  2009-09-11       Impact factor: 3.161

Review 9.  Current trends in dental implants.

Authors:  Laura Gaviria; John Paul Salcido; Teja Guda; Joo L Ong
Journal:  J Korean Assoc Oral Maxillofac Surg       Date:  2014-04-28

10.  Thermal conduction of titanium implants under CO2 laser irradiation in vitro.

Authors:  J Thomas Lambrecht; Tino Nyffeler; Manuela Linder
Journal:  Ann Maxillofac Surg       Date:  2012-01
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.