| Literature DB >> 16076244 |
Jeffrey S Dukes1, Nona R Chiariello, Elsa E Cleland, Lisa A Moore, M Rebecca Shaw, Susan Thayer, Todd Tobeck, Harold A Mooney, Christopher B Field.
Abstract
In this ceEntities:
Mesh:
Substances:
Year: 2005 PMID: 16076244 PMCID: PMC1182693 DOI: 10.1371/journal.pbio.0030319
Source DB: PubMed Journal: PLoS Biol ISSN: 1544-9173 Impact factor: 8.029
Figure 1Biomass Production, Cumulative Precipitation, and Cumulative Temperature from 1998 (the Year before Treatments Began) to 2003
Bars for shoot biomass (grey) and root biomass (black) represent mean values (±SE, n = 8) for quadrants in the “infrastructure control” treatment, which experienced ambient conditions (see Materials and Methods). Cumulative precipitation includes the germinating rain event (defined here as the event that brought cumulative rainfall after October 1 above 12.5 mm) and subsequent precipitation until the last harvest of the year. Cumulative temperature is the sum of average temperatures (in °C) over all days from germination until the final harvest. Shoot biomass (g m−2) was not related to growing season precipitation (mm; linear regression: p = 0.87) or cumulative temperature (°C; p = 0.27), but there was a weak relationship between shoot growth and fall precipitation (linear regression: p = 0.06, slope = 0.646, r 2 = 0.627).
Figure 2Proportional Responses of NPP (Measured as Root + Shoot Biomass), Shoot Biomass, Root Biomass, and Root-to-Shoot Ratio to the Four Global Change Treatments
Each line represents the response over time to a single global change factor, and each data point represents the sum of eight elevated treatment averages divided by the sum of eight ambient treatment averages. Elevated CO2, C (gray dashed line and filled diamonds); increased temperature, T (thin red solid line); increased rainfall, R (thick blue dashed line and triangles); nitrate deposition, N (thick solid green line).
Figure 3NPP (Measured as Root + Shoot Biomass) in Individual and Combined Global Change Treatments
Note that in the similar Figure 2 of Shaw et al. [27], the reference treatments were not the plots with all global change factors at ambient levels, but the average of all of the plots with the global-change factors identified under each bar at ambient levels. Note also that while Shaw et al. eliminated two blocks heavily invaded by non-native perennials in 2000–2001, the current analysis uses data from all of the blocks from every year.
Paired bars depict mean values under ambient (open) and elevated CO2 (grey). A line representing mean biomass of the ambient treatment is drawn across each panel to facilitate comparisons. Shaded yellow areas similarly mark zones within one standard error of the ambient treatment. Panels are shaded blue behind treatments receiving N to highlight plant responses to this treatment. Letters in each panel identify treatment effects (α < 0.05; C denotes elevated CO2) from mixed model analyses of NPP data (*, p < 0.05; **, p < 0.01; ***, p < 0.001; ****, p < 0.0001). Interactions are presented as multiple letters. Ambient, amb; increased temperature, T; increased rainfall, R; nitrate deposition, N. Error bars denote one standard error.
Figure 4Mean Shoot Biomass in Individual and Combined Global Change Treatments
Error bars denote one standard error. Shading, labels, and statistics as in Figure 3.
Figure 5Mean Root Biomass in Individual and Combined Global Change Treatments
Error bars denote one standard error. Shading, labels, and statistics as in Figure 3, with one addition (†, 0.10 > p > 0.05).
Figure 6Mean Total Biomass, Shoot Biomass, and Root Biomass in Individual and Combined Global Change Treatments during the 1999–2003 Period
Shading and labels as in Figure 3. Letters identify treatment effects (α < 0.05) from a repeated measures mixed model analysis (*, p < 0.05; **, p < 0.01; ****, p < 0.0001). Error bars denote one standard error.