Proteolytic extraction of salmon oil and PUFA concentration by lipases.

Commercial proteases (Alcalase, Neutrase, and Flavourzyme) were tested for their ability to release the oil content of marine by-products (salmon heads). The amount of oil (17%) obtained after 2 hours was close to that obtained by the chemical extraction method (20%). Lipolysis of the oil was carried out with Novozym SP398 to obtain a mixture of free fatty acids and acylglycerols (24 hours 45% hydrolysis). The mixture was filtered on a hydrophobic membrane to discriminate between high melting saturated fatty acids and low melting acylglycerols. The sum of total polyunsaturated fatty acids increased from 41.6% in the crude oil to 46.5% in the permeate. The docosahexaenoic acid content increased from 9.9% to 11.6%, and the eicosapentaenoic acid changed from 3.6% to 5.6%. Data from differential scanning calorimetry DSC and from thin layer chromatography coupled with flame ionization detection (TLC-FID) differed significantly between permeate and retentate. A re-esterification of the free fatty acids in the permeate with Lipozyme IM was carried out to increase the amount of long chain acylglycerols.