PATH: a work sampling-based approach to ergonomic job analysis for construction and other non-repetitive work.

A high prevalence and incidence of work-related musculoskeletal disorders have been reported in construction work. Unlike industrial production-line activity, construction work, as well as work in many other occupations (e.g. agriculture, mining), is non-repetitive in nature; job tasks are non-cyclic, or consist of long or irregular cycles. PATH (Posture, Activity, Tools and Handling), a work sampling-based approach, was developed to characterize the ergonomic hazards of construction and other non-repetitive work. The posture codes in the PATH method are based on the Ovako Work Posture Analysing System (OWAS), with other codes included for describing worker activity, tool use, loads handled and grasp type. For heavy highway construction, observations are stratified by construction stage and operation, using a taxonomy developed specifically for this purpose. Observers can code the physical characteristics of the job reliably after about 30 h of training. A pilot study of six construction laborers during four road construction operations suggests that laborers spend large proportions of time in nonneutral trunk postures and spend approximately 20% of their time performing manual material handling tasks. These results demonstrate how the PATH method can be used to identify specific construction operations and tasks that are ergonomically hazardous.