Literature DB >> 15606823

Penetration of bonding resins into fibre-reinforced composite posts: a confocal microscopic study.

F Mannocci1, M Sherriff, T F Watson, P K Vallittu.   

Abstract

AIM: To compare the penetration of two different bonding resins applied for different contact times, on glass reinforced-reinforced composite root canal posts showing an interpenetrating polymer network (IPN) or cross-linked polymer matrix. The research hypothesis was that the bonding resins were equally able to penetrate into the IPN post whereas less penetration was evident into the cross-linked post. In addition, the prolonged contact time of the bonding resin on the surface of post was assumed to increase the resin penetration.
METHODOLOGY: A total of 36 posts, comprising 18 IPN posts (everStick Post) and 18 cross-linked posts (C Post Millennium) were divided into 12 groups of three posts. All posts had a diameter of 1.2 mm. Both bonding resins (Scotchbond Multi Purpose Plus and Stick Resin) were labelled with Rhodamine B for determination of the resin penetration into the post. After contact times of 1, 30 and 300 s the bonding resins were light cured for 60 s. Penetration of bonding resins into three sections of each post was measured by confocal scanning light microscope. The influences of post and type of adhesive resin on resin diffusion into the polymer matrix of the post were assessed by nonparametric methods.
RESULTS: For C Post Millennium and for 1 s contact time, no penetration of bonding resins into the polymer matrix of posts occurred in any section of any post. For the everStick Post, penetration was always noted after 300 s contact (mean 22.8 microm) and nearly always after 30 s contact (mean 3.5 microm), with very little difference between the two adhesives. The degree of penetration into everStick Posts was invariably greater after 300 s contact than after 30 s (P < 0.001). Both sets of results were highly significantly greater than the zero penetration recorded using C Post Millennium or 1 s contact time (P < 0.001).
CONCLUSIONS: The ability of bonding resins to penetrate into everStick Post with IPN polymer matrix may give the opportunity to establish a good link between fibre-reinforced composite posts, luting cements and composite cores.

Entities:  

Mesh:

Substances:

Year:  2005        PMID: 15606823     DOI: 10.1111/j.1365-2591.2004.00900.x

Source DB:  PubMed          Journal:  Int Endod J        ISSN: 0143-2885            Impact factor:   5.264


  21 in total

1.  The effect of post surface treatments on the bond strength of fiber posts to root surfaces.

Authors:  Ali Riza Tuncdemir; Cihan Yildirim; Fatma Güller; Erhan Ozcan; Aslihan Usumez
Journal:  Lasers Med Sci       Date:  2012-01-25       Impact factor: 3.161

2.  Effect of Er:YAG laser pretreatment on bond strength of a composite core build-up material to fiber posts.

Authors:  Igor Križnar; Peter Jevnikar; Aleš Fidler
Journal:  Lasers Med Sci       Date:  2013-08-09       Impact factor: 3.161

3.  Effects of post surface treatments including Er:YAG laser with different parameters on the pull-out bond strength of the fiber posts.

Authors:  Hakan Arslan; Duygu Kurklu; Leyla Benan Ayrancı; Cagatay Barutcigil; Cenk Burak Yılmaz; Ertugrul Karatas; Hüseyin Sinan Topçuoğlu
Journal:  Lasers Med Sci       Date:  2013-11-27       Impact factor: 3.161

4.  Influence of Laser Activated Irrigation with two Erbium Lasers on Bond Strength of Inidividually Formed Fiber Reinforced Composite Posts to Root Canal Dentin.

Authors:  Ivana Parčina; Ivana Miletić; Andrei C Ionescu; Eugenio Brambilla; Dragana Gabrić; Anja Baraba
Journal:  Acta Stomatol Croat       Date:  2016-12

Review 5.  Esthetic Intracanal Posts.

Authors:  Ivana Parčina; Anja Baraba
Journal:  Acta Stomatol Croat       Date:  2016-06

6.  Bond Strength of Fiber Posts to Composite Core: Effect of Surface Treatment With Er,Cr:YSGG Laser and Thermocycling.

Authors:  Sedighe Sadat Hashemikamangar; Masoome Hasanitabatabaee; Saman Kalantari; Mehrzad Gholampourdehaky; Ladan Ranjbaromrani; Hooman Ebrahimi
Journal:  J Lasers Med Sci       Date:  2017-12-26

7.  Comparison of the push-out strength of two fiber post systems dependent on different types of resin cements.

Authors:  Maria Dimitrouli; Werner Geurtsen; Anne-Katrin Lührs
Journal:  Clin Oral Investig       Date:  2011-06-07       Impact factor: 3.573

8.  Effect of three radicular dentine treatments and two luting cements on the regional bond strength of quartz fibre posts.

Authors:  Haiyan Mao; Yaming Chen; Kevin H-K Yip; Roger J Smales
Journal:  Clin Oral Investig       Date:  2010-08-13       Impact factor: 3.573

9.  Marginal adaptation and microleakeage of directly and indirectly made fiber reinforced composite inlays.

Authors:  Kumbuloglu Ovul; Tezvergil-Mutluay Arzu; Saracoglu Ahmet; Lassila Lippo Vj; Vallittu Pekka K
Journal:  Open Dent J       Date:  2011-03-16

10.  An ex vivo comparative study on the retention of custom and prefabricated posts.

Authors:  Abhinav Singh; Ajay Logani; Naseem Shah
Journal:  J Conserv Dent       Date:  2012-04
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.