BACKGROUND AND OBJECTIVES: Previous studies have shown that during the laser irradiation of dentin and bone, thermal damage can be minimized by using a highly absorbed laser wavelength, laser pulses shorter than the thermal relaxation time of the deposited laser energy at that wavelength, and the addition of a layer of water to the tissue surface before ablation. The objective of this study was to investigate the influence of laser pulse duration and wavelength with and without the added water layer on the bond strength of composite to laser prepared dentin surfaces. The specific hypothesis that was tested was that thermal damage to the collagen matrix in dentin compromises the bond strength to composite restorative materials. STUDY DESIGN/ MATERIALS AND METHODS: Three laser systems were employed that were tuned to water, collagen, and mineral absorption with pulse durations less than the thermal relaxation time of the deposited energy. The surfaces of human dentin were irradiated by laser irradiation from free-running and Q-switched Er:YSGG lasers, pulsed CO(2) lasers operating at 9.6-microm, and a Q-switched Nd:YAG laser operating at 355-nm. A motion control system and a pressurized spray system incorporating a microprocessor controlled pulsed nozzle for water delivery, were used to ensure uniform treatment of the entire surface. Shear bond testing was used to evaluate the adhesive strength in order to access the suitability of laser treated surfaces for bonding. Bonded interfaces were examined by SEM. RESULTS: All the laser groups had significantly lower bond strengths than the positive acid etch control group. The highest bond strengths were for the short pulse (< 5-microsecond) Er:YSGG and CO(2) laser groups with water. Laser groups without water had significantly reduced bond strengths and thicker layers of thermally damaged dentin. CONCLUSIONS: Thermal damage to the collagen matrix profoundly influences the bond strength to composite restorations. (c) 2004 Wiley-Liss, Inc.
BACKGROUND AND OBJECTIVES: Previous studies have shown that during the laser irradiation of dentin and bone, thermal damage can be minimized by using a highly absorbed laser wavelength, laser pulses shorter than the thermal relaxation time of the deposited laser energy at that wavelength, and the addition of a layer of water to the tissue surface before ablation. The objective of this study was to investigate the influence of laser pulse duration and wavelength with and without the added water layer on the bond strength of composite to laser prepared dentin surfaces. The specific hypothesis that was tested was that thermal damage to the collagen matrix in dentin compromises the bond strength to composite restorative materials. STUDY DESIGN/ MATERIALS AND METHODS: Three laser systems were employed that were tuned to water, collagen, and mineral absorption with pulse durations less than the thermal relaxation time of the deposited energy. The surfaces of human dentin were irradiated by laser irradiation from free-running and Q-switched Er:YSGG lasers, pulsed CO(2) lasers operating at 9.6-microm, and a Q-switched Nd:YAG laser operating at 355-nm. A motion control system and a pressurized spray system incorporating a microprocessor controlled pulsed nozzle for water delivery, were used to ensure uniform treatment of the entire surface. Shear bond testing was used to evaluate the adhesive strength in order to access the suitability of laser treated surfaces for bonding. Bonded interfaces were examined by SEM. RESULTS: All the laser groups had significantly lower bond strengths than the positive acid etch control group. The highest bond strengths were for the short pulse (< 5-microsecond) Er:YSGG and CO(2) laser groups with water. Laser groups without water had significantly reduced bond strengths and thicker layers of thermally damaged dentin. CONCLUSIONS: Thermal damage to the collagen matrix profoundly influences the bond strength to composite restorations. (c) 2004 Wiley-Liss, Inc.
Authors: Sérgio Brossi Botta; Patricia Aparecida da Ana; Denise Maria Zezell; John M Powers; Adriana Bona Matos Journal: Lasers Med Sci Date: 2007-11-20 Impact factor: 3.161
Authors: Marina Stella Bello-Silva; Martin Wehner; Carlos de Paula Eduardo; Friedrich Lampert; Reinhart Poprawe; Martin Hermans; Marcella Esteves-Oliveira Journal: Lasers Med Sci Date: 2012-05-08 Impact factor: 3.161
Authors: Daniel Nguyen; Kwang Chang; Saba Hedayatollahnajafi; Michal Staninec; Kenneth Chan; Robert Lee; Daniel Fried Journal: J Biomed Opt Date: 2011-07 Impact factor: 3.170