Literature DB >> 15451235

The effect of a 3-methacryloxypropyltrimethoxysilane and vinyltriisopropoxysilane blend and tris(3-trimethoxysilylpropyl)isocyanurate on the shear bond strength of composite resin to titanium metal.

Jukka P Matinlinna1, Mutlu Ozcan, Lippo V J Lassila, Pekka K Vallittu.   

Abstract

OBJECTIVES: The aim of this study was to evaluate the reactions of silanes prior to attaching the composite to titanium and evaluate these silanes as coupling agents. Veneered titanium may be used as a prosthetic material.
METHODS: Two silane solutions, a mixture of both gamma-methacryloxypropyltrimethoxysilane and vinyltriisopropoxysilane, and tris(3-trimethoxysilylpropyl)isocyanurate were prepared as 2 wt% in two different (95% 2-propanol and 90% acetone) solutions. A control, 2 wt% gamma-methacryloxypropyltrimethoxysilane was prepared in both solutions. These six silane solutions were applied onto flat titanium surfaces. The samples (N = 250) were divided into two main groups: air-dried (room temperature) and heat cured for 1 h at 110 degrees C. Sinfony veneering composite was applied and light-cured on the titanium. The control group was non-silanized. The specimens were assigned to two subgroups: not thermocycled, and thermocycled (5000 cycles, 5-55 degrees C). Shear bond strength of the composite was tested at a crosshead speed of 1.0 mm min(-1). Fresh silane solution hydrolysis, and condensation reaction on titanium surface were monitored by FTIR spectrometry.
RESULTS: Dry samples could be successfully tested, while thermocycling after 3700 cycles had gradually de-bonded the composite from the silanized titanium substrate. For dry samples, statistical analysis (ANOVA) showed that solvent and silane significantly affected the shear bond strength. The silane mixture in 2-propanol reacted at room temperature yielded 11.3 MPa (Standard deviation, SD, 3.6 MPa) and on the other hand, tris(3-trimethoxysilylpropyl)isocyanurate in 2-propanol yielded 10.7 MPa (SD 8.0 MPa) and gamma-methacryloxypropyltrimethoxysilane 20.4 MPa (SD 12.2 MPa). Non-silanized samples yielded 4.8 MPa (SD 2.1 MPa). SIGNIFICANCE: In all solvents used, silanes reacted chemically with the titanium surface and covalent Si-O-Ti- and -Si-O-Si- bonds were evident.

Entities:  

Mesh:

Substances:

Year:  2004        PMID: 15451235     DOI: 10.1016/j.dental.2003.10.009

Source DB:  PubMed          Journal:  Dent Mater        ISSN: 0109-5641            Impact factor:   5.304


  5 in total

1.  Hybrid denture acrylic composites with nanozirconia and electrospun polystyrene fibers.

Authors:  A A Elmadani; I Radović; N Z Tomić; M Petrović; D B Stojanović; R Jančić Heinemann; V Radojević
Journal:  PLoS One       Date:  2019-12-18       Impact factor: 3.240

2.  Alternative radiopacifiers for polymethyl methacrylate bone cements: Silane-treated anatase titanium dioxide and yttria-stabilised zirconium dioxide.

Authors:  Wayne Nishio Ayre; Nicole Scully; Carole Elford; Bronwen Aj Evans; Wendy Rowe; Jeff Rowlands; Ravi Mitha; Paul Malpas; Panagiota Manti; Cathy Holt; Rhidian Morgan-Jones; James C Birchall; Stephen P Denyer; Sam L Evans
Journal:  J Biomater Appl       Date:  2021-02-11       Impact factor: 2.646

3.  The effect of surface roughness on repair bond strength of light-curing composite resin to polymer composite substrate.

Authors:  Timo T Kallio; Arzu Tezvergil-Mutluay; Lippo V J Lassila; Pekka K Vallittu
Journal:  Open Dent J       Date:  2013-09-30

4.  Factors affecting the bond strength of denture base and reline acrylic resins to base metal materials.

Authors:  Naomi Tanoue; Yasuhiro Matsuda; Hiroaki Yanagida; Hideo Matsumura; Takashi Sawase
Journal:  J Appl Oral Sci       Date:  2013 Jul-Aug       Impact factor: 2.698

5.  Heat treatment following surface silanization in rebonded tribochemical silica-coated ceramic brackets: shear bond strength analysis.

Authors:  Emilia Adriane Silva; Flávia Zardo Trindade; Hélcio Nagib José Feres Reskalla; José Renato Cavalcanti de Queiroz
Journal:  J Appl Oral Sci       Date:  2013 Jul-Aug       Impact factor: 2.698

  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.