Role of ceramic implants. Design and clinical success with total hip prosthetic ceramic-to-ceramic bearings.

Ceramic implants have become of great interest because of the increased awareness that wear debris from metal-polyethylene components of total hip prostheses can cause osteolysis around implants. Polyethylene wear rates with the Charnley total hip prosthesis were found to be from 0.1 to 0.2 mm/year in the elderly, which corresponded to 30 to 80 mm3 of polyethylene debris being released to the joint tissues. This in turn can be related to 40 million to 40 billion particles being released into the joint every year. This polyethylene particulate is heavily implicated in the osteolytic destruction of periarticular tissues. The ceramic ball, ceramic cup combination of total hip prostheses may have promise of wear rates that could be thousands of times smaller than polyethylene alone. Such alumina ceramic prosthetic concepts were introduced in Europe from 1970 to 1973. Under Food and Drug Administration regulations at that time, the only U.S. introductions allowed circa 1980 were the Autophor and Xenophor types of ceramic prostheses. However, this particular prosthetic design was not successful in the United States because of pain, neck-socket impingement, ceramic fracture, and component loosening. This did not therefore appear to be a successful compromise in the hands of U.S. surgeons. Ceramic innovations from Europe now include cemented ceramic cups of "matching" tolerances with the femoral ball, and press-fit Ti-alloy acetabular shells with modular ceramic inserts. In addition, alumina and zirconia ceramic balls are now in routine clinical use in Europe. The objectives of this Symposium are to highlight these ceramic ball, ceramic cup innovations with their long-term clinical results from Europe. Then one can evaluate which of these innovations in material and design selections offers the best possible alternatives in the 1990s.