Literature DB >> 14652731

[A new irrigation-suction boring system facilities low-pressure intramedullary boring of isolated swine femurs].

A Joist1, M Schult, U Frerichmann, T Frebel, H-U Spiegel, M Koppe, U Joosten.   

Abstract

AIM: Intramedullary nailing is the treatment of choice for the stabilization of fractures of long tubular bones. An important disadvantage of this method is the increase in intramedullary pressure and the resulting release of fat into the venous blood system during reaming of the medullary canal. We have developed a new type of rinsing-suction-reamer (SSB) in order to minimize these disadvantages. Trials were initiated to investigate whether it is possible to ream the medullary canal with the SSB without pressure increase in comparison with the standard AO-reamer (AOB).
METHODS: Reamed intramedullary nailing was performed in 20 isolated pig femora. The intramedullary pressure was recorded continuously.
RESULTS: While stepwise reaming was performed, the pressure only rose above the physiological level in AOB. During insertion of the guide wire and the nail, comparable values were measured for AOB and SSB.
CONCLUSION: Our experiments show that reaming of the medullary canal is possible without a pressure increase using the SSB in comparison with AOB.

Entities:  

Mesh:

Year:  2003        PMID: 14652731     DOI: 10.1007/s00113-003-0655-0

Source DB:  PubMed          Journal:  Unfallchirurg        ISSN: 0177-5537            Impact factor:   1.000


  21 in total

1.  Pressure changes during reaming with different parameters and reamer designs.

Authors:  M Mousavi; R David; J Ehteshami; G Pajenda; V Vécsei
Journal:  Clin Orthop Relat Res       Date:  2000-04       Impact factor: 4.176

2.  Blood-gas and circulatory changes during total knee replacement. Role of the intramedullary alignment rod.

Authors:  N R Fahmy; H P Chandler; K Danylchuk; E B Matta; N Sunder; J M Siliski
Journal:  J Bone Joint Surg Am       Date:  1990-01       Impact factor: 5.284

3.  Comparison of mechanical loads produced by current intramedullary reamer systems.

Authors:  R D Peindl; M E Harrow; D M Banks; M J Bosse; J F Kellam
Journal:  J Orthop Trauma       Date:  1998 Nov-Dec       Impact factor: 2.512

4.  Some basic biomechanical characteristics of medullary pressure generation during reaming of the femur.

Authors:  J A Johnson; A Berkshire; R K Leighton; M Gross; D G Chess; D Petrie
Journal:  Injury       Date:  1995-09       Impact factor: 2.586

5.  Cardiac arrest during intramedullary nailing for femoral metastases.

Authors:  P S Kerr; M Jackson; R M Atkins
Journal:  J Bone Joint Surg Br       Date:  1993-11

6.  Effect of flexible drive diameter and reamer design on the increase of pressure in the medullary cavity during reaming.

Authors:  C Müller; R Frigg; U Pfister
Journal:  Injury       Date:  1993       Impact factor: 2.586

7.  [New aspects of closed intramedullary nailing and marrow cavity reaming in animal experiments. II. Intramedullary pressure in marrow cavity reaming (author's transl)].

Authors:  K M Stürmer; W Schuchardt
Journal:  Unfallheilkunde       Date:  1980-07

8.  [The reaction of intramedullary pressure in bone marrow drilling and pegging].

Authors:  W Wehner; C Morgenstern; G Zeumer
Journal:  Zentralbl Chir       Date:  1966-02-12       Impact factor: 0.942

9.  Effect of proximal and distal venting during intramedullary nailing.

Authors:  R Martin; R K Leighton; D Petrie; C Ikejiani; B Smyth
Journal:  Clin Orthop Relat Res       Date:  1996-11       Impact factor: 4.176

10.  Pathogenesis and clinical relevance of bone marrow embolism in medullary nailing--demonstrated by intraoperative echocardiography.

Authors:  K Wenda; M Runkel; J Degreif; G Ritter
Journal:  Injury       Date:  1993       Impact factor: 2.586

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.