Literature DB >> 14568050

Formation, modeling and validation of trihalomethanes (THM) in Malaysian drinking water: a case study in the districts of Tampin, Negeri Sembilan and Sabak Bernam, Selangor, Malaysia.

Md Pauzi Abdullah1, C H Yew, Mohamad Salleh bin Ramli.   

Abstract

A modeling procedure that predicts trihalomethane (THM) formation from field sampling at the treatment plant and along its distribution system using Tampin district, Negeri Sembilan and Sabak Bernam district, Selangor as sources of data were studied and developed. Using Pearson method of correlation, the organic matter measured as TOC showed a positive correlation with formation of THM (r=0.380,P=0.0001 for Tampin and r=0.478,P=0.0001 for Sabak Bernam). Similar positive correlation was also obtained for pH in both districts with Tampin (r=0.362,P=0.0010) and Sabak Bernam (r=0.215,P=0.0010). Chlorine dosage was also found to have low correlation with formation of THM for the two districts with Tampin (r=0.233,P=0.0230) and Sabak Bernam (r=0.505,P=0.0001). Distance from treatment plant was found to have correlation with formation of THM for Tampin district with r=0.353 and P=0.0010. Other parameters such as turbidity, ammonia, temperature and residue chlorine were found to have no correlation with formation of THM. Linear and non-linear models were developed for these two districts. The results obtained were validated using three different sets of field data obtained from own source and district of Seremban (Pantai and Sg. Terip), Negeri Sembilan. Validation results indicated that there was significant difference in the predictive and determined values of THM when two sets of data from districts of Seremban were used with an exception of field data of Sg. Terip for non-linear model developed for district of Tampin. It was found that a non-linear model is slightly better than linear model in terms of percentage prediction errors. The models developed were site specific and the predictive capabilities in the distribution systems vary with different environmental conditions.

Entities:  

Mesh:

Substances:

Year:  2003        PMID: 14568050     DOI: 10.1016/j.watres.2003.07.005

Source DB:  PubMed          Journal:  Water Res        ISSN: 0043-1354            Impact factor:   11.236


  11 in total

1.  Modeling the formation of chlorination by-products during enhanced coagulation.

Authors:  Vedat Uyak; Ismail Toroz
Journal:  Environ Monit Assess       Date:  2006-06-13       Impact factor: 2.513

2.  A two-stage predictive model to simultaneous control of trihalomethanes in water treatment plants and distribution systems: adaptability to treatment processes.

Authors:  Antonio Domínguez-Tello; Ana Arias-Borrego; Tamara García-Barrera; José Luis Gómez-Ariza
Journal:  Environ Sci Pollut Res Int       Date:  2017-08-15       Impact factor: 4.223

3.  Multi-level modelling of chlorination by-product presence in drinking water distribution systems for human exposure assessment purposes.

Authors:  Christelle Legay; Manuel J Rodriguez; Luis Miranda-Moreno; Jean-Baptiste Sérodes; Patrick Levallois
Journal:  Environ Monit Assess       Date:  2010-09-23       Impact factor: 2.513

4.  Determination of volatile organic compounds pollution sources in malaysian drinking water using multivariate analysis.

Authors:  Shiau-Chian Soh; Md Pauzi Abdullah
Journal:  Environ Monit Assess       Date:  2006-09-12       Impact factor: 2.513

5.  High potential for the formation of haloacetic acids in the Karoon River water in Iran.

Authors:  Bahman Ramavandi; Sina Dobaradaran; Ghorban Asgari; Hossein Masoumbeigi
Journal:  Environ Monit Assess       Date:  2012-08-17       Impact factor: 2.513

6.  Assessment, modeling and optimization of parameters affecting the formation of disinfection by-products in water.

Authors:  Chrysa Gougoutsa; Christophoros Christophoridis; Constantinos K Zacharis; Konstantinos Fytianos
Journal:  Environ Sci Pollut Res Int       Date:  2016-05-14       Impact factor: 4.223

7.  Modeling and optimization of trihalomethanes formation potential of surface water (a drinking water source) using Box-Behnken design.

Authors:  Kunwar P Singh; Premanjali Rai; Priyanka Pandey; Sarita Sinha
Journal:  Environ Sci Pollut Res Int       Date:  2011-06-22       Impact factor: 4.223

8.  Investigation of trihalomethanes formation potential in Karoon River water, Iran.

Authors:  Moradali Fooladvand; Bahman Ramavandi; Keyvan Zandi; Mojtaba Ardestani
Journal:  Environ Monit Assess       Date:  2010-09-09       Impact factor: 2.513

9.  Modeling of trihalomethanes (THMs) in drinking water supplies: a case study of eastern part of India.

Authors:  Minashree Kumari; S K Gupta
Journal:  Environ Sci Pollut Res Int       Date:  2015-04-26       Impact factor: 4.223

10.  Formation potentials of bromate and brominated disinfection by-products in bromide-containing water by ozonation.

Authors:  Tao Lin; Shouke Wu; Wei Chen
Journal:  Environ Sci Pollut Res Int       Date:  2014-07-19       Impact factor: 4.223

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.