Formation of chlorinated and brominated dioxins and other organohalogen compounds at the pilot incineration plant VERONA.

Experiments were conducted at the VERONA pilot plant, an incineration plant with stationary grate and separate post-combustion chamber, using wood and propane as basic combustible materials and with controlled dosage of various bromine-, chlorine- and copper-containing compounds. The behaviour of the following compounds was studied in the combustion chamber, after the post-combustion chamber and after the heat exchanger: polychlorinated phenols (PCPh), polybrominated phenols (PBrPh), polychlorinated benzenes (PCBz), polybrominated benzenes (PBrBz), polychlorinated dioxins and furans (PCDD/F) and polybrominated dioxins and furans (PBDD/F). The bromine co-incineration leaded to very high bromophenol concentrations after the post-combustion chamber. The formation of brominated and mixed-halogenated phenols and the further reaction to halogenated dioxins is apparently a relevant reaction mechanism for dioxin formation in processes involving bromine. This assumption is supported by the high formation rates of PBDD/F found in the heat exchanger, which were 4-20 times higher than those of PCDD/F. Moreover, the strong correlations found between the formation rates of PCPh, PCBz and PCDD/F in the heat exchanger indicate that in addition considerable new formation of dioxins takes place through de novo synthesis. Experiments involving the variation of primary operational parameters and fuel properties have shown that the quality of post-combustion plays a much greater role than the other parameters. Furthermore, it became apparent that the congeners of the chlorophenols and of the chlorobenzenes, measured in various incineration stages, do not correlate closely with the dioxin concentrations after the heat exchanger.