Literature DB >> 12854785

Fiber-reinforced composite crowns and FPDs: a clinical report.

Michael Behr1, Martin Rosentritt, Gerhard Handel.   

Abstract

PURPOSE: This clinical study reports on the results of single molar crowns, three-unit inlay fixed partial dentures (FPD), and complete-coverage FPDs made of the glass-fiber composite system Targis/Vectris with an observation period up to 4.4 years.
MATERIALS AND METHODS: In total, 38 restorations were inserted in 19 patients. Of these, 17 were adhesively fixed three-unit inlay FPDs, five were conventionally cemented complete-coverage three-unit FPDs, and 16 were single molar crowns (six adhesively, ten conventionally cemented). The mean observation period was 2.5 +/- 1.0 years. Events like fracture of the framework or veneer, loss of cementation, signs of wear, and outward discoloration were noted and rated according to modified Ryge criteria.
RESULTS: During the observation time, neither loss of cementation nor framework fracture were noted. However, six facings (36%) of the inlay FPDs fractured. The number of cases with discoloration or wear increased over time for all types of restorations. The wear culminated in fiber exposure of two molar crowns (24 months) and one inlay FPD (54 months). One of the five complete-coverage FPDs was replaced at the request of the patient (discoloration). The cumulative survival rate after 36 months was estimated to be 82% for molar crowns and 72% for inlay FPDs.
CONCLUSION: Fiber-reinforced composite restorations need further improvement of the veneering composites. Because of the increasing wear, discoloration, fractures of the facings, and fiber exposure, fiber-reinforced composites should only be used for provisional restorations.

Entities:  

Mesh:

Substances:

Year:  2003        PMID: 12854785

Source DB:  PubMed          Journal:  Int J Prosthodont        ISSN: 0893-2174            Impact factor:   1.681


  10 in total

1.  Experimental composites made of electron beam irradiated reinforced fillers.

Authors:  M Behr; M Rosentritt; K Hagenbuch; A Faltermeier; G Handel
Journal:  J Mater Sci Mater Med       Date:  2007-10-04       Impact factor: 3.896

2.  Fracture load of three-unit full-contour fixed dental prostheses fabricated with subtractive and additive CAD/CAM technology.

Authors:  Moritz Zimmermann; Andreas Ender; Thomas Attin; Albert Mehl
Journal:  Clin Oral Investig       Date:  2019-07-08       Impact factor: 3.573

3.  CEREC CAD/CAM Chairside System.

Authors:  G Sannino; F Germano; L Arcuri; E Bigelli; C Arcuri; A Barlattani
Journal:  Oral Implantol (Rome)       Date:  2015-04-13

4.  Long-term behavior of double crown retained dentures with metal and metal-free secondary crowns and frameworks made of Vectris(©) on all-ceramic primary crowns: a prospective, randomized clinical trial up to 14 years.

Authors:  T Zahn; B Zahn; S Janko; P Weigl; S Gerhardt-Szép; H C Lauer
Journal:  Clin Oral Investig       Date:  2015-09-23       Impact factor: 3.573

5.  Comparison of the fracture toughness and wear resistance of indirect composites cured by conventional post curing methods and electron beam irradiation.

Authors:  C Vaishnavi; S Kavitha; L Lakshmi Narayanan
Journal:  J Conserv Dent       Date:  2010-07

6.  Fracture resistance of fiber-reinforced vs. non-fiber-reinforced composite molar crowns.

Authors:  M Behr; M Rosentritt; D Latzel; G Handel
Journal:  Clin Oral Investig       Date:  2003-06-19       Impact factor: 3.573

7.  Conservative approach for restoring posterior missing tooth with fiber reinforcement materials: four clinical reports.

Authors:  Emine Sirin Karaarslan; Ertan Ertas; Semih Ozsevik; Aslihan Usumez
Journal:  Eur J Dent       Date:  2011-08

8.  Three-dimensional finite element analysis of the stress distribution pattern in a mandibular first molar tooth restored with five different restorative materials.

Authors:  Kathleen Manuela D'souza; Meena Ajay Aras
Journal:  J Indian Prosthodont Soc       Date:  2017 Jan-Mar

9.  Fixed partial dentures in an up to 8-year follow-up.

Authors:  Maximiliano Sérgio Cenci; Paulo Antônio da Rosa Rodolpho; Tatiana Pereira-Cenci; Altair Antoninha Del Bel Cury; Flávio Fernando Demarco
Journal:  J Appl Oral Sci       Date:  2010 Jul-Aug       Impact factor: 2.698

Review 10.  An overview of development and status of fiber-reinforced composites as dental and medical biomaterials.

Authors:  Pekka K Vallittu
Journal:  Acta Biomater Odontol Scand       Date:  2018-04-12
  10 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.