OBJECTIVES: Presently, a design-based and practical method for measuring amniotic fluid volume (AFV) for routine clinical examinations has not been proposed. In this study we describe a new method, which combines the Cavalieri method with ultrasound imaging to estimate AFV. METHODS: We measured the AFVs of 14 women in the third trimester of pregnancy, and repeated our measurements three times for each woman. Parallel planimetric ultrasonographic images were obtained at every 2 cm along the longitudinal uterine axis. AFVs were calculated as the total of the multiples of the estimated cut surface areas by the section thickness. RESULTS: The mean estimated AFV was 380.5 cm3. The coefficient of error of each measurement was calculated and the mean was 0.108. The coefficient of correlation between the amniotic fluid index and our AFV estimations was 0.87. CONCLUSIONS: Design-based and efficient estimation of AFV is possible with the combination of consecutive ultrasound images and the Cavalieri method.
OBJECTIVES: Presently, a design-based and practical method for measuring amniotic fluid volume (AFV) for routine clinical examinations has not been proposed. In this study we describe a new method, which combines the Cavalieri method with ultrasound imaging to estimate AFV. METHODS: We measured the AFVs of 14 women in the third trimester of pregnancy, and repeated our measurements three times for each woman. Parallel planimetric ultrasonographic images were obtained at every 2 cm along the longitudinal uterine axis. AFVs were calculated as the total of the multiples of the estimated cut surface areas by the section thickness. RESULTS: The mean estimated AFV was 380.5 cm3. The coefficient of error of each measurement was calculated and the mean was 0.108. The coefficient of correlation between the amniotic fluid index and our AFV estimations was 0.87. CONCLUSIONS: Design-based and efficient estimation of AFV is possible with the combination of consecutive ultrasound images and the Cavalieri method.