Literature DB >> 1270453

Preliminary observations of bone ingrowth into porous materials.

D M Robertson, L Pierre, R Chahal.   

Abstract

A preliminary investigation has been performed (a) to determine the kinetics of bone ingrowth into porous materials and to determine if this ingrowth could be catalyzed by the presence of a foreign substrate; and (b) to measure the bonding capability of bone with a porous-surfaced metallic implant. Tests on porous-surfaced implants corroborate the work of other investigators in showing that bony tissue will grow into a porous substance that has pores large enough to support tissue nourishment. The shear strength of the bone-implant interface appears to increase with pore size and time of healing. Furthermore, it may be possible to catalyze this tissue ingrowth by the introduction into the fracture site of a foreign substance; in this experiment, glass beads 200-290mu in diameter were used.

Mesh:

Substances:

Year:  1976        PMID: 1270453     DOI: 10.1002/jbm.820100304

Source DB:  PubMed          Journal:  J Biomed Mater Res        ISSN: 0021-9304


  13 in total

1.  A novel multilayer model with controllable mechanical properties for magnesium-based bone plates.

Authors:  Juncen Zhou; Wanru Huang; Qing Li; Zuxin She; Funan Chen; Longqin Li
Journal:  J Mater Sci Mater Med       Date:  2015-03-20       Impact factor: 3.896

Review 2.  New Developments of Ti-Based Alloys for Biomedical Applications.

Authors:  Yuhua Li; Chao Yang; Haidong Zhao; Shengguan Qu; Xiaoqiang Li; Yuanyuan Li
Journal:  Materials (Basel)       Date:  2014-03-04       Impact factor: 3.623

Review 3.  Nickel-free austenitic stainless steels for medical applications.

Authors:  Ke Yang; Yibin Ren
Journal:  Sci Technol Adv Mater       Date:  2010-02-26       Impact factor: 8.090

4.  Evolution of Microstructural and Mechanical Properties during Cold-Rolling Deformation of a Biocompatible Ti-Nb-Zr-Ta Alloy.

Authors:  Alexandru Dan; Mariana Lucia Angelescu; Nicolae Serban; Elisabeta Mirela Cojocaru; Nicoleta Zarnescu-Ivan; Vasile Danut Cojocaru; Bogdan Mihai Galbinasu
Journal:  Materials (Basel)       Date:  2022-05-17       Impact factor: 3.748

5.  Biotribocorrosion of 3D-Printed silica-coated Ti6Al4V for load-bearing implants.

Authors:  Ali Afrouzian; Jose D Avila; Amit Bandyopadhyay
Journal:  J Mater Res       Date:  2021-07-13       Impact factor: 2.909

6.  Neo-osteogenesis of haversian trabeculae through a bone chamber implanted in a rabbit tibial cortex: a control model.

Authors:  H Winet; J Y Bao; R Moffat
Journal:  Calcif Tissue Int       Date:  1990-07       Impact factor: 4.333

7.  Influence of porosity on mechanical properties and in vivo response of Ti6Al4V implants.

Authors:  Amit Bandyopadhyay; Felix Espana; Vamsi Krishna Balla; Susmita Bose; Yusuke Ohgami; Neal M Davies
Journal:  Acta Biomater       Date:  2009-11-12       Impact factor: 8.947

8.  Engineering alloplastic temporomandibular joint replacements.

Authors:  Hani Sinno; Youssef Tahiri; Mirko Gilardino; Dennis Bobyn
Journal:  Mcgill J Med       Date:  2011-06

9.  Fabrication of Titanium-Niobium-Zirconium-Tantalium Alloy (TNZT) Bioimplant Components with Controllable Porosity by Spark Plasma Sintering.

Authors:  Jack Rechtin; Elisa Torresani; Eugene Ivanov; Eugene Olevsky
Journal:  Materials (Basel)       Date:  2018-01-24       Impact factor: 3.623

10.  In vitro and in vivo study of additive manufactured porous Ti6Al4V scaffolds for repairing bone defects.

Authors:  Guoyuan Li; Lei Wang; Wei Pan; Fei Yang; Wenbo Jiang; Xianbo Wu; Xiangdong Kong; Kerong Dai; Yongqiang Hao
Journal:  Sci Rep       Date:  2016-09-26       Impact factor: 4.379

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.