Literature DB >> 12680051

Innovative method for the analysis of the internal 3D fitting accuracy of Cerec-3 crowns.

G Bornemann1, S Lemelson, R Luthardt.   

Abstract

Mesh：

Substances：

Year:  2002        PMID： 12680051

Source DB:  PubMed          Journal:  Int J Comput Dent        ISSN： 1463-4201            Impact factor:   1.883


× No keyword cloud information.
  9 in total

1.  Different CAD/CAM-processing routes for zirconia restorations: influence on fitting accuracy.

Authors:  Philipp Kohorst; Janet Junghanns; Marc P Dittmer; Lothar Borchers; Meike Stiesch
Journal:  Clin Oral Investig       Date:  2010-05-22       Impact factor: 3.573

2.  Adaptation of all-ceramic fixed partial dentures.

Authors:  Márcia Borba; Paulo F Cesar; Jason A Griggs; Álvaro Della Bona
Journal:  Dent Mater       Date:  2011-09-13       Impact factor: 5.304

3.  Marginal and internal fit of CAD/CAM and slip-cast made zirconia copings.

Authors:  Kianoosh Torabi Ardekani; Ahmad Hassan Ahangari; Leila Farahi
Journal:  J Dent Res Dent Clin Dent Prospects       Date:  2012-06-06

4.  Dimensional Changes of 3-Unit Implant-Supported Zirconia Frameworks of Two CAD/CAM Systems from Scanning to Sintering.

Authors:  Marzieh Alikhasi; Narges Ameri; Hakimeh Siadat; Ahmad Reza Shamshiri; Mohammadreza Nejati
Journal:  Front Dent       Date:  2019-06-29

5.  Influence of contemporary CAD-CAM milling systems on the fit and adaptation of partially stabilized Zirconia fixed partial dentures.

Authors:  Khulud A Al-Aali; Rana S Alhamdan; Ahmed M Maawadh; Fahim Vohra; Tariq Abduljabbar
Journal:  Pak J Med Sci       Date:  2021 Jan-Feb       Impact factor: 1.088

6.  Comparison of prosthetic models produced by traditional and additive manufacturing methods.

Authors:  Jin-Young Park; Hae-Young Kim; Ji-Hwan Kim; Jae-Hong Kim; Woong-Chul Kim
Journal:  J Adv Prosthodont       Date:  2015-08-18       Impact factor: 1.904

7.  Evaluation of marginal fit of 2 CAD-CAM anatomic contour zirconia crown systems and lithium disilicate glass-ceramic crown.

Authors:  Min-Kyung Ji; Ji-Hee Park; Sang-Won Park; Kwi-Dug Yun; Gye-Jeong Oh; Hyun-Pil Lim
Journal:  J Adv Prosthodont       Date:  2015-08-18       Impact factor: 1.904

Review 8.  Trends in computer-aided manufacturing in prosthodontics: a review of the available streams.

Authors:  Jaafar Abduo; Karl Lyons; Mohammed Bennamoun
Journal:  Int J Dent       Date:  2014-04-08

9.  Gap comparison between single crown and three-unit bridge zirconia substructures.

Authors:  Chuchai Anunmana; Masnisa Charoenchitt; Chanavut Asvanund
Journal:  J Adv Prosthodont       Date:  2014-08-14       Impact factor: 1.904
  9 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.