Literature DB >> 12594981

A three-dimensional numerical simulation of mandible fracture reduction with screwed miniplates.

José R Fernández1, M Gallas, M Burguera, J M Viaño.   

Abstract

A three-dimensional finite element model of a fractured human mandible treated with plating technique was developed to simulate and to study the biomechanical loads and the stress field distribution. Biomechanical properties of bone have been thoroughly investigated experimentally. In this work, using the finite element method, complete clinical conditions (after surgical reduction, post-operatory period, complete healing period) were simulated. The mandible fracture was located in the symphysis region and one or two titanium miniplates, fixed with monocortical screws, were evaluated. The behaviour of a reduced human mandible with screwed miniplates, as well as its complete healing, is investigated and described.

Entities:  

Mesh：

Year:  2003        PMID： 12594981     DOI： 10.1016/s0021-9290(02)00416-5

Source DB:  PubMed          Journal:  J Biomech        ISSN： 0021-9290            Impact factor:   2.712


  12 in total

1.  Use of finite element analysis in presurgical planning: treatment of mandibular fractures.

Authors:  E P Kavanagh; C Frawley; G Kearns; F Wallis; T McGloughlin; J Jarvis
Journal:  Ir J Med Sci       Date:  2008-09-18       Impact factor: 1.568

2.  Finite element analysis of patient-specific condyle fracture plates: a preliminary study.

Authors:  Peter Aquilina; William C H Parr; Uphar Chamoli; Stephen Wroe
Journal:  Craniomaxillofac Trauma Reconstr       Date:  2014-11-14

3.  Three lateral osteotomy designs for bilateral sagittal split osteotomy: biomechanical evaluation with three-dimensional finite element analysis.

Authors:  Hiromasa Takahashi; Shigeaki Moriyama; Haruhiko Furuta; Hisao Matsunaga; Yuki Sakamoto; Toshihiro Kikuta
Journal:  Head Face Med       Date:  2010-03-26       Impact factor: 2.151

4.  Role of 1.5 mm microplates in treatment of symphyseal fracture of mandible: A stress analysis based comparative study.

Authors:  Syed S Ahmed; Siddharth Bhardwaj; Md Kalim Ansari; Omar Farooq; Abid Ali Khan
Journal:  J Oral Biol Craniofac Res       Date:  2017-04-14

5.  Biomechanical influence of anchorages on orthodontic space closing mechanics by sliding method.

Authors:  Zhan Liu; Tinghui Sun; Yubo Fan
Journal:  Med Biol Eng Comput       Date:  2020-03-11       Impact factor: 2.602

6.  A Biomechanical Comparison of Three 1.5-mm Plate and Screw Configurations and a Single 2.0-mm Plate for Internal Fixation of a Mandibular Condylar Fracture.

Authors:  Peter Aquilina; William C H Parr; Uphar Chamoli; Stephen Wroe; Philip Clausen
Journal:  Craniomaxillofac Trauma Reconstr       Date:  2014-04-18

7.  Complication rate in mandibular angle fractures-one vs. two plates: a 12-year retrospective analysis.

Authors:  Raphael Ferrari; M Lanzer; D Wiedemeier; M Rücker; M Bredell
Journal:  Oral Maxillofac Surg       Date:  2018-10-16

8.  Integrity of a Single Superior Border Plate Repair in Mandibular Angle Fracture: A Novel Cadaveric Human Mandible Model.

Authors:  Somsak Sittitavornwong; Douglas Denson; David Ashley; David Cruz Walma; Sarah Potter; Jonathan Freind
Journal:  J Oral Maxillofac Surg       Date:  2018-08-06       Impact factor: 1.895

9.  Assessment of Lingual Stability in Mandible Fracture: Monocortical Versus Bicortical Fixation Using FEM Analysis.

Authors:  Udupikrishna Joshi; Manju Kurakar
Journal:  J Maxillofac Oral Surg       Date:  2017-12-16

10.  Development of a Titanium Plate for Mandibular Angle Fractures with a Bone Defect in the Lower Border: Finite Element Analysis and Mechanical Test.

Authors:  Douglas Rangel Goulart; Daniel Takanori Kemmoku; Pedro Yoshito Noritomi; Márcio de Moraes
Journal:  J Oral Maxillofac Res       Date:  2015-06-30
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.