OBJECTIVES: To investigate pulpal space pressure and temperature after application of Nd:YAG laser, and high-speed diamond bur on dentin surface. METHODS: One and 3 W Nd:YAG laser and high-speed diamond bur were used to remove dentine from twenty extracted premolars. The pulp chambers were monitored for pressure and temperature changes with a pressure transducer and thermocouple, respectively. RESULTS: Regardless of the remaining dentin thickness (RDT), laser irradiation and high-speed diamond bur use generated an increase in pulpal space pressure and temperature (ANOVA and Fisher's LSD tests, P < 0.001). Pressure and temperature increased with an increase in laser power. Three-Watt laser irradiation caused greater changes than 1 W (1.75 kPa and 1.31 degrees C, 0.53 kPa and 0.34 degrees C, respectively). Both pulpal space pressure (P < 0.001) and temperature (P < 0.005) increased as the RDT decreased. CONCLUSIONS: Laser irradiation and the use of a high-speed diamond bur generated an increase in pulpal space pressure and temperature. Pulpal space pressure and temperature increased with an increase in energy density of laser and a decrease in RDT. Copyright 2002 Elsevier Science Ltd.
OBJECTIVES: To investigate pulpal space pressure and temperature after application of Nd:YAG laser, and high-speed diamond bur on dentin surface. METHODS: One and 3 W Nd:YAG laser and high-speed diamond bur were used to remove dentine from twenty extracted premolars. The pulp chambers were monitored for pressure and temperature changes with a pressure transducer and thermocouple, respectively. RESULTS: Regardless of the remaining dentin thickness (RDT), laser irradiation and high-speed diamond bur use generated an increase in pulpal space pressure and temperature (ANOVA and Fisher's LSD tests, P < 0.001). Pressure and temperature increased with an increase in laser power. Three-Watt laser irradiation caused greater changes than 1 W (1.75 kPa and 1.31 degrees C, 0.53 kPa and 0.34 degrees C, respectively). Both pulpal space pressure (P < 0.001) and temperature (P < 0.005) increased as the RDT decreased. CONCLUSIONS: Laser irradiation and the use of a high-speed diamond bur generated an increase in pulpal space pressure and temperature. Pulpal space pressure and temperature increased with an increase in energy density of laser and a decrease in RDT. Copyright 2002 Elsevier Science Ltd.