Literature DB >> 12507240

Influence of implant geometry and surface characteristics on progressive osseointegration.

Nico C Geurs1, Robert L Jeffcoat, Edwin A McGlumphy, Michael S Reddy, Marjorie K Jeffcoat.   

Abstract

PURPOSE: Although no currently available technique for the measurement of osseointegration is entirely satisfactory, 3 clinical variables can be reasonably associated with the process: probing depth, micromobility, and crestal bone height. Micromobility can be quantified to some extent with the use of the Periotest, a commercially available instrument In this investigation, the influence of surface characteristics and geometry upon Periotest value (PTV) and probing depth measurements was studied.
MATERIALS AND METHODS: In a multicenter trial, 120 healthy edentulous patients received 5 or 6 implants in the anterior mandible and were followed for 3 years. A total of 634 implants were placed. Every patient received at least 1 implant of each of 3 types: threaded titanium plasma-sprayed (TPS), threaded hydroxyapatite-coated (HA), and cylindric HA-coated. A randomization schedule assured that approximately equal numbers of each type of implant were placed and that they were uniformly distributed over the arch.
RESULTS: Of the 4 tested combinations of dependent and independent variables, the only statistically significant (P < .05) effect was that of coating on PTV. At 1 year after prosthetic restoration, the mean PTV for HA-coated threaded implants was -5.36 +/- 1.24, compared with -4.86 +/- 1.70 for TPS implants. This difference steadily declined in magnitude and significance, until, after 3 years, the groups were indistinguishable. DISCUSSION: This study agrees with the previous observations that HA coating tends to accelerate the initial rate of osseointegration. The absence of a difference between threaded and cylindric implants confirms that the PTV responds to micromobility near the surface, on a scale much smaller than such gross geometric features.
CONCLUSION: On the basis of these results, one may conclude that HA-coated implants exhibit a more rapid decrease in micromobility than do TPS implants of identical geometry.

Entities:  

Mesh:

Substances:

Year:  2002        PMID: 12507240

Source DB:  PubMed          Journal:  Int J Oral Maxillofac Implants        ISSN: 0882-2786            Impact factor:   2.804


  9 in total

1.  Surface modification of a Ti-7.5Mo alloy using NaOH treatment and Bioglass coating.

Authors:  Wen-Fu Ho; Chien-Hung Lai; Hsueh-Chuan Hsu; Shih-Ching Wu
Journal:  J Mater Sci Mater Med       Date:  2010-01-13       Impact factor: 3.896

2.  Nucleation and growth of octacalcium phosphate on treated titanium by immersion in a simplified simulated body fluid.

Authors:  Enori Gemelli; Cristiane Xavier Resende; Gloria Dulce de Almeida Soares
Journal:  J Mater Sci Mater Med       Date:  2010-07       Impact factor: 3.896

3.  Biomimetic calcium phosphate coating on Ti-7.5Mo alloy for dental application.

Authors:  A L A Escada; J P B Machado; S G Schneider; M C R Alves Rezende; A P R Alves Claro
Journal:  J Mater Sci Mater Med       Date:  2011-09-10       Impact factor: 3.896

4.  Histomorphometric evaluation of implants coated with enamel or dentine derived fluoride-substituted apatite.

Authors:  Mehmet Kürkcü; Mehmet Emre Benlidayi; Serhat Ozsoy; Lütfiye Sevgi Ozyeğin; Faik Nuzhet Oktar; Cem Kurtoğlu
Journal:  J Mater Sci Mater Med       Date:  2007-06-19       Impact factor: 3.896

Review 5.  Evaluation of functional dynamics during osseointegration and regeneration associated with oral implants.

Authors:  Po-Chun Chang; Niklaus P Lang; William V Giannobile
Journal:  Clin Oral Implants Res       Date:  2010-01       Impact factor: 5.977

6.  Nanotechnology and dental implants.

Authors:  Sandrine Lavenus; Guy Louarn; Pierre Layrolle
Journal:  Int J Biomater       Date:  2010-12-28

Review 7.  WITHDRAWN: Interventions for replacing missing teeth: different types of dental implants.

Authors:  Marco Esposito; Yasmin Ardebili; Helen V Worthington
Journal:  Cochrane Database Syst Rev       Date:  2019-10-10

8.  A review paper on biomimetic calcium phosphate coatings.

Authors:  X Lin; K de Groot; D Wang; Q Hu; D Wismeijer; Y Liu
Journal:  Open Biomed Eng J       Date:  2015-02-27

9.  Microarchitecture of titanium cylinders obtained by additive manufacturing does not influence osseointegration in the sheep.

Authors:  Louis Rony; Eric Aguado; Bruno Verlee; Florence Pascaretti-Grizon; Daniel Chappard
Journal:  Regen Biomater       Date:  2021-06-25
  9 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.