Literature DB >> 12459056

Synthesis, biodegradability, and biocompatibility of lysine diisocyanate-glucose polymers.

Jian-Ying Zhang1, Eric J Beckman, Jing Hu, Guo-Guang Yang, Sudha Agarwal, Jeffrey O Hollinger.   

Abstract

The success of a tissue-engineering application depends on the use of suitable biomaterials that degrade in a timely manner and induce the least immunogenicity in the host. With this purpose in mind, we have attempted to synthesize a novel nontoxic biodegradable lysine diisocyanate (LDI)- and glucose-based polymer via polymerization of highly purified LDI with glucose and its subsequent hydration to form a spongy matrix. The LDI-glucose polymer was degradable in aqueous solutions at 37, 22, and 4 degrees C, and yielded lysine and glucose as breakdown products. The degradation products of the LDI-glucose polymer did not significantly affect the pH of the solution. The physical properties of the polymer were found to be adequate for supporting cell growth in vitro, as evidenced by the fact that rabbit bone marrow stromal cells (BMSCs) attached to the polymer matrix, remained viable on its surface, and formed multilayered confluent cultures with retention of their phenotype over a period of 2 to 4 weeks. These observations suggest that the LDI-glucose polymer and its degradation products were nontoxic in vitro. Further examination in vivo over 8 weeks revealed that subcutaneous implantation of hydrated matrix degraded in vivo three times faster than in vitro. The implanted polymer was not immunogenic and did not induce antibody responses in the host. Histological analysis of the implanted polymer showed that LDI-glucose polymer induced a minimal foreign body reaction, with formation of a capsule around the degrading polymer. The results suggest that biodegradable peptide-based polymers can be synthesized, and may potentially find their way into biomedical applications because of their biodegradability and biocompatibility.

Entities:  

Mesh:

Substances:

Year:  2002        PMID: 12459056      PMCID: PMC4955530          DOI: 10.1089/10763270260424132

Source DB:  PubMed          Journal:  Tissue Eng        ISSN: 1076-3279


  29 in total

1.  Preparation and characterization of hydrophobic polymeric films that are thromboresistant via nitric oxide release.

Authors:  K A Mowery; M H Schoenfisch; J E Saavedra; L K Keefer; M E Meyerhoff
Journal:  Biomaterials       Date:  2000-01       Impact factor: 12.479

2.  Mechanical strain-induced proliferation of osteoblastic cells parallels increased TGF-beta 1 mRNA.

Authors:  H Zhuang; W Wang; A D Tahernia; C L Levitz; W T Luchetti; C T Brighton
Journal:  Biochem Biophys Res Commun       Date:  1996-12-13       Impact factor: 3.575

3.  Foreign-body reactions to fracture fixation implants of biodegradable synthetic polymers.

Authors:  O Böstman; E Hirvensalo; J Mäkinen; P Rokkanen
Journal:  J Bone Joint Surg Br       Date:  1990-07

Review 4.  Evolution of bone transplantation: molecular, cellular and tissue strategies to engineer human bone.

Authors:  M J Yaszemski; R G Payne; W C Hayes; R Langer; A G Mikos
Journal:  Biomaterials       Date:  1996-01       Impact factor: 12.479

5.  Latex allergy in operating room nurses.

Authors:  S R Mace; G L Sussman; G Liss; D F Stark; D Beezhold; R Thompson; K Kelly
Journal:  Ann Allergy Asthma Immunol       Date:  1998-03       Impact factor: 6.347

6.  Degradation behaviour of block copolymers containing poly(lactic-glycolic acid) and poly(ethylene glycol) segments.

Authors:  M Penco; S Marcioni; P Ferruti; S D' Antone; R Deghenghi
Journal:  Biomaterials       Date:  1996-08       Impact factor: 12.479

7.  Stabilized polyglycolic acid fibre-based tubes for tissue engineering.

Authors:  D J Mooney; C L Mazzoni; C Breuer; K McNamara; D Hern; J P Vacanti; R Langer
Journal:  Biomaterials       Date:  1996-01       Impact factor: 12.479

Review 8.  Tissue-engineered morphogenesis of cartilage and bone by means of cell transplantation using synthetic biodegradable polymer matrices.

Authors:  C A Vacanti; J Upton
Journal:  Clin Plast Surg       Date:  1994-07       Impact factor: 2.017

9.  Measurements of serum glucose using the luciferin/luciferase system and a liquid scintillation spectrometer.

Authors:  L A Idahl; P E Sandström; J Sehlin
Journal:  Anal Biochem       Date:  1986-05-15       Impact factor: 3.365

10.  Laminated three-dimensional biodegradable foams for use in tissue engineering.

Authors:  A G Mikos; G Sarakinos; S M Leite; J P Vacanti; R Langer
Journal:  Biomaterials       Date:  1993-04       Impact factor: 12.479

View more
  18 in total

1.  Characterization of the degradation mechanisms of lysine-derived aliphatic poly(ester urethane) scaffolds.

Authors:  Andrea E Hafeman; Katarzyna J Zienkiewicz; Angela L Zachman; Hak-Joon Sung; Lillian B Nanney; Jeffrey M Davidson; Scott A Guelcher
Journal:  Biomaterials       Date:  2010-09-22       Impact factor: 12.479

Review 2.  Injectable foams for regenerative medicine.

Authors:  Edna M Prieto; Jonathan M Page; Andrew J Harmata; Scott A Guelcher
Journal:  Wiley Interdiscip Rev Nanomed Nanobiotechnol       Date:  2013-10-11

3.  Injectable polyurethane composite scaffolds delay wound contraction and support cellular infiltration and remodeling in rat excisional wounds.

Authors:  Elizabeth J Adolph; Andrea E Hafeman; Jeffrey M Davidson; Lillian B Nanney; Scott A Guelcher
Journal:  J Biomed Mater Res A       Date:  2011-11-21       Impact factor: 4.396

4.  The effect of the local delivery of platelet-derived growth factor from reactive two-component polyurethane scaffolds on the healing in rat skin excisional wounds.

Authors:  Bing Li; Jeffrey M Davidson; Scott A Guelcher
Journal:  Biomaterials       Date:  2009-03-28       Impact factor: 12.479

5.  Injectable biodegradable polyurethane scaffolds with release of platelet-derived growth factor for tissue repair and regeneration.

Authors:  Andrea E Hafeman; Bing Li; Toshitaka Yoshii; Katarzyna Zienkiewicz; Jeffrey M Davidson; Scott A Guelcher
Journal:  Pharm Res       Date:  2008-05-31       Impact factor: 4.200

6.  Injectable, compression-resistant polymer/ceramic composite bone grafts promote lateral ridge augmentation without protective mesh in a canine model.

Authors:  Anne D Talley; Lauren A Boller; Kerem N Kalpakci; Daniel A Shimko; David L Cochran; Scott A Guelcher
Journal:  Clin Oral Implants Res       Date:  2018-05-16       Impact factor: 5.977

7.  Synthesis and characterization of segmented poly(esterurethane urea) elastomers for bone tissue engineering.

Authors:  Katherine D Kavlock; Todd W Pechar; Jeffrey O Hollinger; Scott A Guelcher; Aaron S Goldstein
Journal:  Acta Biomater       Date:  2007-04-05       Impact factor: 8.947

8.  Resorbable Nanocomposites with Bone-Like Strength and Enhanced Cellular Activity.

Authors:  S Lu; M A P McEnery; B R Rogers; J C Wenke; D Shimko; S A Guelcher
Journal:  J Mater Chem B       Date:  2017-05-11       Impact factor: 6.331

9.  A Novel Polyurethane Expandable Root Canal Sealer.

Authors:  Mohammad Ali Saghiri; Kasra Karamifar; Devyani Nath; James L Gutmann; Nader Sheibani
Journal:  J Endod       Date:  2020-12-23       Impact factor: 4.171

Review 10.  Recent advances in synthetic bioelastomers.

Authors:  Rui Shi; Dafu Chen; Quanyong Liu; Yan Wu; Xiaochuan Xu; Liqun Zhang; Wei Tian
Journal:  Int J Mol Sci       Date:  2009-11-20       Impact factor: 6.208

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.