BACKGROUND AND OBJECTIVES: To assess the effect of erbium:yttrium aluminium garnet (Er:YAG) laser on bond strength to dentin of a self-etching primer (Clearfil Liner Bond 2V, CL2V) and two single-bottle agents (Excite, EX; Gluma One Bond, GB). STUDY DESIGN/ MATERIALS AND METHODS: Thirty human molars were selected, roots were removed and crowns were bisected, providing 60 halves. Specimens were included and ground to expose dentin. Bonding site was limited and samples were assigned to three groups: I, CL2V; II, EX; III, GB. Dentin was either conventionally treated or submitted to laser conditioning + conventional treatment. The adhesive protocol was performed, samples were stored for 24 hours and bond strength was tested to failure (0.5 mm/min). RESULTS: Statistical analysis showed a decrease in bond strength for lased subgroups and this drop was more evident for EX. CL2V provided the best overall results, regardless of the surface treatment. CONCLUSIONS: Er:YAG laser may adversely affect bond strength in higher or lesser degree, depending on the adhesive system used. Copyright 2002 Wiley-Liss, Inc.
BACKGROUND AND OBJECTIVES: To assess the effect of erbium:yttrium aluminium garnet (Er:YAG) laser on bond strength to dentin of a self-etching primer (Clearfil Liner Bond 2V, CL2V) and two single-bottle agents (Excite, EX; Gluma One Bond, GB). STUDY DESIGN/ MATERIALS AND METHODS: Thirty human molars were selected, roots were removed and crowns were bisected, providing 60 halves. Specimens were included and ground to expose dentin. Bonding site was limited and samples were assigned to three groups: I, CL2V; II, EX; III, GB. Dentin was either conventionally treated or submitted to laser conditioning + conventional treatment. The adhesive protocol was performed, samples were stored for 24 hours and bond strength was tested to failure (0.5 mm/min). RESULTS: Statistical analysis showed a decrease in bond strength for lased subgroups and this drop was more evident for EX. CL2V provided the best overall results, regardless of the surface treatment. CONCLUSIONS: Er:YAG laser may adversely affect bond strength in higher or lesser degree, depending on the adhesive system used. Copyright 2002 Wiley-Liss, Inc.
Authors: B Bahrami; N Askari; M Tielemans; D Heysselaer; L Lamard; A Peremans; C Nyssen-Behets; S Nammour Journal: Lasers Med Sci Date: 2010-03-23 Impact factor: 3.161
Authors: Camila Scatena; Carolina Paes Torres; Jaciara Miranda Gomes-Silva; Marta Maria Martins Giamatei Contente; Jesus Djalma Pécora; Regina Guenka Palma-Dibb; Maria Cristina Borsatto Journal: Lasers Med Sci Date: 2010-04-02 Impact factor: 3.161