Literature DB >> 12069347

Osteoblast differentiation of bone marrow stromal cells cultured on silica gel and sol-gel-derived titania.

S C Dieudonné1, J van den Dolder, J E de Ruijter, H Paldan, T Peltola, M A van 't Hof, R P Happonen, J A Jansen.   

Abstract

Primary cultures of osteogenic precursor cells derived from rat bone marrow stroma were performed on commercially available pure titanium discs (Ti c.p.) and surface modified Ti c.p.using a sol-gel technique (Ti sol). In separate repeated experimental runs, cell behavior and in vitro mineralization were compared with cultures on silica gel bioactive glass discs (S53P4). All substrates were incubated in simulated body fluid prior to the experiment. Overall, variable effects between experimental runs were seen. Apparently, this was due to the heterogeneous nature of the used cell population. Therefore, only careful conclusions can be made. Initial cell adhesion and growth rates between 3 and 5 days of culture--analyzed by cell numbers--were in general comparable for the two titanium substrates, while initial growth up to day 3 is suggested to be higher in Ti c.p. compared to Ti sol. Although initial cell adhesion on the S53P4 glass discs was lower than the titanium substrates, cell growth rates appeared to be higher on the silica gel compared to the two titanium substrates. Further, there were some indications that the early and late osteoblast differentiation markers, alkaline phosphatase and osteocalcin, monitored up to day 24, were elevated in Ti c.p cultures compared to Ti sol cultures. There were no differences observed in in vitro mineralization between the titanium groups. S53P4 seemed to display a substantially higher differentiating capacity for both osteogenic cell markers as well as in vitro mineralization compared to the two titanium substrates.

Entities:  

Mesh:

Substances:

Year:  2002        PMID: 12069347     DOI: 10.1016/s0142-9612(02)00068-6

Source DB:  PubMed          Journal:  Biomaterials        ISSN: 0142-9612            Impact factor:   12.479


  9 in total

1.  Investigation of silica-iron-phosphate glasses for tissue engineering.

Authors:  A Patel; J C Knowles
Journal:  J Mater Sci Mater Med       Date:  2006-10       Impact factor: 3.896

2.  Functionalization of titanium based metallic biomaterials for implant applications.

Authors:  Rahul Bhola; Fengyun Su; Catherine E Krull
Journal:  J Mater Sci Mater Med       Date:  2011-04-08       Impact factor: 3.896

3.  The influence of bone formation on anchoring percutaneous devices with titanium fibre mesh flanges.

Authors:  M M Shalabi; X F Walboomers; J A Jansen
Journal:  J Mater Sci Mater Med       Date:  2004-07       Impact factor: 3.896

4.  In vitro osteogenesis on fluorcanasite glass-ceramic with three different chemical compositions.

Authors:  Jorge Luiz Jacob Liporaci; Adalberto Luiz Rosa; Marcio Mateus Beloti; Anthony Johnson; Richard van Noort; Valdemar Mallet da Rocha Barros
Journal:  J Mater Sci Mater Med       Date:  2007-08-01       Impact factor: 3.896

5.  Effects of biosilicate and bioglass 45S5 on tibial bone consolidation on rats: a biomechanical and a histological study.

Authors:  Renata N Granito; Daniel Araki Ribeiro; Ana Claudia M Rennó; Christian Ravagnani; Paulo S Bossini; Oscar Peitl-Filho; Edgar D Zanotto; Nivaldo A Parizotto; Jorge Oishi
Journal:  J Mater Sci Mater Med       Date:  2009-12       Impact factor: 3.896

6.  Phenotypic characterization, osteoblastic differentiation, and bone regeneration capacity of human embryonic stem cell-derived mesenchymal stem cells.

Authors:  Premjit Arpornmaeklong; Shelley E Brown; Zhuo Wang; Paul H Krebsbach
Journal:  Stem Cells Dev       Date:  2009-09       Impact factor: 3.272

Review 7.  Generation of microgrooved silica nanotube membranes with sustained drug delivery and cell contact guidance ability by using a Teflon microfluidic chip.

Authors:  Song Chen; Xuetao Shi; Shanmugavel Chinnathambi; Hongkai Wu; Nobutaka Hanagata
Journal:  Sci Technol Adv Mater       Date:  2013-02-13       Impact factor: 8.090

8.  Nanoscale Surface Modifications of Orthopaedic Implants: State of the Art and Perspectives.

Authors:  Rmt Staruch; M F Griffin; Pem Butler
Journal:  Open Orthop J       Date:  2016-12-30

9.  Chemically Treated 3D Printed Polymer Scaffolds for Biomineral Formation.

Authors:  Richard J Jackson; P Stephen Patrick; Kristopher Page; Michael J Powell; Mark F Lythgoe; Mark A Miodownik; Ivan P Parkin; Claire J Carmalt; Tammy L Kalber; Joseph C Bear
Journal:  ACS Omega       Date:  2018-04-19
  9 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.