Literature DB >> 12068417

The odyssey of porous-coated fixation.

Charles A Engh1, Robert H Hopper.   

Abstract

Among all primary total hip arthroplasties (THAs) performed at our institution between 1977 and 1998, we retrospectively reviewed the outcome of 3,314 THAs performed with Anatomic Medullary Locking (AML), Prodigy, and Solution stems (all DePuy, Warsaw, IN). These hips included 460 proximally coated stems and 2,854 extensively coated stems. Survivorship rates for proximally and extensively coated stems were >95% at 15 years, using revision for any reason as an endpoint. Slight differences in thigh pain, stress shielding, and patient satisfaction were not significant. The 2.8% rate of component loosening among proximally coated stems was significantly higher than the 1.1% rate observed with extensively coated stems. Because of the relatively easy, reproducible surgical technique associated with extensively porous-coated stems and the perception of marginally better outcome, we prefer to use extensively porous-coated stems for all primary THAs. Copyright 2002, Elsevier Science (USA).

Entities:  

Mesh:

Substances:

Year:  2002        PMID: 12068417     DOI: 10.1054/arth.2002.32547

Source DB:  PubMed          Journal:  J Arthroplasty        ISSN: 0883-5403            Impact factor:   4.757


  8 in total

1.  [Cementless stems of the hip. Current status].

Authors:  H Effenberger; M Imhof; U Witzel; S Rehart
Journal:  Orthopade       Date:  2005-05       Impact factor: 1.087

2.  Fifteen- to 20-year results of uncemented tapered fully porous-coated cobalt-chrome stems.

Authors:  Taek Rim Yoon; Sung-Man Rowe; Myung-Sun Kim; Sang-Gwon Cho; Jong-Keun Seon
Journal:  Int Orthop       Date:  2007-02-24       Impact factor: 3.075

3.  Survivorship of 2000 tapered titanium porous plasma-sprayed femoral components.

Authors:  Adolph V Lombardi; Keith R Berend; Thomas H Mallory; Michael D Skeels; Joanne B Adams
Journal:  Clin Orthop Relat Res       Date:  2008-10-31       Impact factor: 4.176

4.  The development of a scanning strategy for the manufacture of porous biomaterials by selective laser melting.

Authors:  R Stamp; P Fox; W O'Neill; E Jones; C Sutcliffe
Journal:  J Mater Sci Mater Med       Date:  2009-06-18       Impact factor: 3.896

5.  Cementless bipolar hemiarthroplasty for unstable intertrochanteric fractures in elderly patients.

Authors:  Won Sik Choy; Jae Hoon Ahn; Joon-Hyuk Ko; Byoung Sup Kam; Do-Hyun Lee
Journal:  Clin Orthop Surg       Date:  2010-11-05

6.  Congenital hip dysplasia treated by total hip arthroplasty using cementless tapered stem in patients younger than 50 years old: results after 12-years follow-up.

Authors:  Cesare Faldini; Maria Teresa Miscione; Mohammadreza Chehrassan; Francesco Acri; Camilla Pungetti; Michele d'Amato; Deianira Luciani; Sandro Giannini
Journal:  J Orthop Traumatol       Date:  2011-11-24

7.  A new 3D printing porous trabecular titanium metal acetabular cup for primary total hip arthroplasty: a minimum 2-year follow-up of 92 consecutive patients.

Authors:  Xiao Geng; Yang Li; Feng Li; Xinguang Wang; Ke Zhang; Zhongjun Liu; Hua Tian
Journal:  J Orthop Surg Res       Date:  2020-09-04       Impact factor: 2.359

8.  Cementless total hip replacement: past, present, and future.

Authors:  Harumoto Yamada; Yasuo Yoshihara; Osamu Henmi; Mitsuhiro Morita; Yuichiro Shiromoto; Tomoki Kawano; Arihiko Kanaji; Kennichi Ando; Masato Nakagawa; Naoto Kosaki; Eiichi Fukaya
Journal:  J Orthop Sci       Date:  2009-04-01       Impact factor: 1.601

  8 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.