Literature DB >> 12039860

Development of a hybrid cardiovascular graft using a tissue engineering approach.

Alok Tiwari1, Henryk J Salacinski, Geoffrey Punshon, George Hamilton, Alexander M Seifalian.   

Abstract

Tissue engineering of endothelial cells (EC) and chemical engineering with anticoagulant moieties has been undertaken in order to improve prosthetic graft patency and thrombogenicity. This was done by covalently bonding a compliant poly(carbonate-urea)urethane graft (MyoLink) with arginine-glycine-aspartate (RGD) or/and heparin (Hep) to ascertain whether EC retention could be improved. The retention of these moieties and EC was assessed after exposure to pulsatile flow. We covalently bonded RGD, Hep, and RGD/Hep onto the luminal surface of MyoLink using spacer arm technology. Narrow-beam X-ray photoelectron spectroscopy was carried out to check the efficiency of the bonding. EC were radiolabeled and seeded onto native MyoLink and with 1) RGD-, 2) Hep-, and 3) RGD/Hep-bonded grafts and exposed to shear stress in a physiological flow circuit for 6 h, which reproduces femoral artery flow waveforms and pulsatility. Results were recorded on a gamma camera imaging system. Viability of cells was tested with a modified Alamar Blue assay (ABA) and scanning electron microscopy for morphological appearance of seeded cells. Experiments were repeated (n=6). RGD, Hep, and RGD/Hep were bonded together in a uniform distribution on the luminal surface of each graft type, and bioactivity of each moiety covalently bonded was very high. In the flow circuit, there was exponential cell retention for the first 60 min of flow for all the grafts, but after 6 h of exposure to pulsatile flow the RGD/Hep-bonded graft had a significantly better cell retention rate than native MyoLink (75.7%+/-2.3 vs. 60.5+/-10.1, P<0.05). ABA test showed that all the seeded cells postexposure to flow were viable, and significantly higher metabolic activity was recorded on a RGD/Hep-bonded graft than with MyoLink-seeded graft (P<0.01). Using RGD/Hep covalently bonded onto graft surfaces improves cell retention and provides an antithrombogenic surface for initial blood flow in vivo until full EC activity develops postseeding. This would allow the development and further improvement of hybrid grafts.

Entities:  

Mesh:

Substances:

Year:  2002        PMID: 12039860     DOI: 10.1096/fj.01-0826com

Source DB:  PubMed          Journal:  FASEB J        ISSN: 0892-6638            Impact factor:   5.191


  17 in total

Review 1.  Engineering of bypass conduits to improve patency.

Authors:  S T Rashid; H J Salacinski; B J Fuller; G Hamilton; A M Seifalian
Journal:  Cell Prolif       Date:  2004-10       Impact factor: 6.831

2.  A novel ovine ex vivo arteriovenous shunt model to test vascular implantability.

Authors:  Haofan Peng; Evan M Schlaich; Sindhu Row; Stelios T Andreadis; Daniel D Swartz
Journal:  Cells Tissues Organs       Date:  2011-10-14       Impact factor: 2.481

3.  Synthesis, characterization and cytocompatibility of polyurethaneurea elastomers with designed elastase sensitivity.

Authors:  Jianjun Guan; William R Wagner
Journal:  Biomacromolecules       Date:  2005 Sep-Oct       Impact factor: 6.988

4.  Synthesis and evaluation of amphiphilic RGD derivatives: uses for solvent casting in polymers and tissue engineering applications.

Authors:  A G Kidane; H J Salacinski; G Punshon; B Ramesh; K S Srai; A M Seifalian
Journal:  Med Biol Eng Comput       Date:  2003-11       Impact factor: 2.602

5.  Two ply tubular scaffolds comprised of proteins/poliglecaprone/polycaprolactone fibers.

Authors:  Xing Zhang; Vinoy Thomas; Yogesh K Vohra
Journal:  J Mater Sci Mater Med       Date:  2009-11-10       Impact factor: 3.896

Review 6.  Biomaterial-Based Approaches to Address Vein Graft and Hemodialysis Access Failures.

Authors:  Timothy C Boire; Daniel A Balikov; Yunki Lee; Christy M Guth; Joyce Cheung-Flynn; Hak-Joon Sung
Journal:  Macromol Rapid Commun       Date:  2016-09-27       Impact factor: 5.734

7.  Improvement in endothelial cell adhesion and retention under physiological shear stress using a laminin-apatite composite layer on titanium.

Authors:  Fupo He; Xiupeng Wang; Osamu Maruyama; Ryo Kosaka; Yu Sogo; Atsuo Ito; Jiandong Ye
Journal:  J R Soc Interface       Date:  2013-02-13       Impact factor: 4.118

8.  3D printing and characterization of a soft and biostable elastomer with high flexibility and strength for biomedical applications.

Authors:  Emilio O Bachtiar; Ozan Erol; Michal Millrod; Runhan Tao; David H Gracias; Lewis H Romer; Sung Hoon Kang
Journal:  J Mech Behav Biomed Mater       Date:  2020-01-23

9.  Elastase-sensitive elastomeric scaffolds with variable anisotropy for soft tissue engineering.

Authors:  Jianjun Guan; Kazuro L Fujimoto; William R Wagner
Journal:  Pharm Res       Date:  2008-05-29       Impact factor: 4.200

10.  Biodegradable elastomeric scaffolds with basic fibroblast growth factor release.

Authors:  Jianjun Guan; John J Stankus; William R Wagner
Journal:  J Control Release       Date:  2007-04-13       Impact factor: 9.776

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.