Light microscopy evaluation of polyurethane vascular grafts porosity by Sudan Black B staining.

In small-diameter vascular grafts, the porosity of the internal surface plays an important role because it affects initial thrombus deposition and therefore the graft's patency. As well as many other studies reported in the literature we have carried out a study of the relationship between porosity and the manufacturing parameters of polyurethane (PU) grafts by standard scanning electron microscopy (SEM) analysis. However, SEM was not completely satisfactory for evaluating the 'sponge-like' uptake of water by the graft due to the unavoidable water loss and metal coating during preparation. In fact this preparation produces artefacts of the three-dimensional porous structure. To avoid this problem we investigated the possibility of observing the graft's internal surface through a stereomicroscope after it had absorbed water. We looked into a simple staining procedure which preferentially colours the PU graft fibres with respect to the void areas. After testing different kinds of stains, we eventually found that Sudan Black B, which usually stains for all kinds of lipid, turned out to be an excellent stain for the water-loaded PU grafts when diluted with ethanol. This staining procedure, coupled with a computerized image analysis system, allowed us to evaluate the degree of void and average void size of the graft internal surface and to correlate these data with graft density and manufacturing parameters.