Neural network based automated algorithm to identify joint locations on hand/wrist radiographs for arthritis assessment.

Arthritis is a significant and costly healthcare problem that requires objective and quantifiable methods to evaluate its progression. Here we describe software that can automatically determine the locations of seven joints in the proximal hand and wrist that demonstrate arthritic changes. These are the five carpometacarpal (CMC1, CMC2, CMC3, CMC4, CMC5), radiocarpal (RC), and the scaphocapitate (SC) joints. The algorithm was based on an artificial neural network (ANN) that was trained using independent sets of digitized hand radiographs and manually identified joint locations. The algorithm used landmarks determined automatically by software developed in our previous work as starting points. Other than requiring user input of the location of nonanatomical structures and the orientation of the hand on the film, the procedure was fully automated. The software was tested on two datasets: 50 digitized hand radiographs from patients participating in a large clinical study, and 60 from subjects participating in arthritis research studies and who had mild to moderate rheumatoid arthritis (RA). It was evaluated by a comparison to joint locations determined by a trained radiologist using manual tracing. The success rate for determining the CMC, RC, and SC joints was 87%-99%, for normal hands and 81%-99% for RA hands. This is a first step in performing an automated computer-aided assessment of wrist joints for arthritis progression. The software provides landmarks that will be used by subsequent image processing routines to analyze each joint individually for structural changes such as erosions and joint space narrowing.