Improving sensitivity of direct microscopy for detection of acid-fast bacilli in sputum: use of chitin in mucus digestion.

In order to try to improve the results of direct smear microscopy, we used the mucus-digesting quality of chitin in tuberculosis (TB) laboratories. For this purpose, a total of 430 sputum specimens were processed by the N-acetyl-L-cysteine concentration, sodium hypochlorite (NaOCl) liquefaction, chitin sedimentation, and direct microscopy methods. Then, the smear sensitivity for acid-fast bacillus detection by chitin-treated sputum was compared with the sensitivity of smears prepared by other methods. Our results showed that the chitin solution took less time to completely homogenize the mucoid sputum than did the N-acetyl-L-cysteine and NaOCl methods. The N-acetyl-L-cysteine concentration method demonstrated sensitivity and specificity levels of 83 and 97%, respectively. In comparison, the sensitivity of chitin sedimentation was 80%, with a specificity of 96.7%. The NaOCl liquefaction method showed a sensitivity of 78%, with a specificity of 96%. Finally, the sensitivity of direct microscopy was lower than those of the other tested methods and was only 46%, with a specificity of 90%. The chitin and NaOCl liquefaction methods are both easy to perform, and they do not require additional equipment (centrifuges). Also, our results demonstrated that the chitin method is less time-consuming than the NaOCl method, since only 30 min of incubation is required to bring complete sedimentation of bacilli in chitin-treated sputum whereas the NaOCl method needs 10 to 12 h to give the same results in the same sputum specimens. Therefore, the chitin liquefaction and sedimentation method may provide better results in TB laboratories of developing countries than the N-acetyl-L-cysteine concentration, NaOCl overnight sedimentation, and direct smear microscopy methods.