Literature DB >> 11749227

Solid-state microstructures, thermal properties, and crystallization of biodegradable poly(butylene succinate) (PBS) and its copolyesters.

Z Gan1, H Abe, H Kurokawa, Y Doi.   

Abstract

Studies of solid-state structures under different crystallization conditions, melting behavior, and crystal growth kinetics are reported for biodegradable aliphatic poly(butylene succinate) (PBS) and its random copolyesters of poly(butylene succinate-co-14 mol %ethylene succinate) [P(BS-co-14 mol %ES)] and poly(butylene succinate-co-15 mol %hexamethylene succinate) [P(BS-co-15 mol %HS)]. The crystal structures of two copolyesters determined by wide-angle X-ray diffraction (WAXD) are the same as that of the PBS homopolymer, suggesting that the second comonomers ES or HS units are excluded from the crystalline core and are in an amorphous state. The further investigations on the crystalline and amorphous phase structures and sizes by small-angle X-ray scattering (SAXS) method have provided quantitative evidence that the existence of second comonomers increases the amorphous thickness of copolyesters but that the influences of comonomers on the lamellar crystal structure and size of copolyesters are complicated. The origin of the complexity and its influences on the equilibrium melting temperature T(m)(0) of copolyester are discussed in the present paper. Gibbs-Thomson and Hoffman-Weeks equations were applied for the determination of T(m)(0) of PBS, P(BS-co-14 mol %ES), and P(BS-co-15 mol %HS)-three samples. Two equations gave different T(m)(0) values for each sample. On the basis of the Gibbs-Thomson equation, the P(BS-co-15 mol %HS) copolyester has the same T(m)(0) value as that of the PBS homopolymer, while the P(BS-co-14 mol %ES) copolyester has a lower one. This is due to the different influences of the second comonomers on the crystalline phase structure indicated by SAXS results, and the Gibbs-Thomson equation has been suggested to be more reliable. The crystal growth kinetics of the three samples was analyzed by using the secondary nucleation theory, and the influences of various parameters on the regime transition and nucleation constant were studied. Meanwhile some interrelations between regime transition temperature and melting behavior were found for the three samples.

Entities:  

Mesh:

Substances:

Year:  2001        PMID: 11749227     DOI: 10.1021/bm015535e

Source DB:  PubMed          Journal:  Biomacromolecules        ISSN: 1525-7797            Impact factor:   6.988


  10 in total

Review 1.  A Review on Properties and Application of Bio-Based Poly(Butylene Succinate).

Authors:  S Ayu Rafiqah; Abdan Khalina; Ahmad Saffian Harmaen; Intan Amin Tawakkal; Khairul Zaman; M Asim; M N Nurrazi; Ching Hao Lee
Journal:  Polymers (Basel)       Date:  2021-04-29       Impact factor: 4.329

2.  Polyamide 11/Poly(butylene succinate) Bio-Based Polymer Blends.

Authors:  Maria Laura Di Lorenzo; Alessandra Longo; René Androsch
Journal:  Materials (Basel)       Date:  2019-09-03       Impact factor: 3.623

3.  PBS-Based Green Copolymer as an Efficient Compatibilizer in Thermoplastic Inedible Wheat Flour/Poly(butylene succinate) Blends.

Authors:  Michelina Soccio; Franco Dominici; Silvia Quattrosoldi; Francesca Luzi; Andrea Munari; Luigi Torre; Nadia Lotti; Debora Puglia
Journal:  Biomacromolecules       Date:  2020-07-10       Impact factor: 6.988

4.  Slow-DEET-Release Mosquito-Repellent System Based on Poly(butylene succinate).

Authors:  Hande Ece Yener; Rafael Erdmann; Katalee Jariyavidyanont; António B Mapossa; Walter W Focke; Georg Hillrichs; René Androsch
Journal:  ACS Omega       Date:  2022-03-03

5.  The relationship of structure, thermal and water vapor permeability barrier properties of poly(butylene succinate)/organomodified beidellite clay bionanocomposites prepared by in situ polycondensation.

Authors:  Mohamed Ilsouk; Mustapha Raihane; Benaissa Rhouta; Remo Merijs Meri; Janis Zicans; Jana Vecstaudža; Mohammed Lahcini
Journal:  RSC Adv       Date:  2020-10-08       Impact factor: 4.036

6.  Novel tunable super-tough materials from biodegradable polymer blends: nano-structuring through reactive extrusion.

Authors:  Feng Wu; Manjusri Misra; Amar K Mohanty
Journal:  RSC Adv       Date:  2019-01-21       Impact factor: 4.036

7.  Trans crystallization behavior and strong reinforcement effect of cellulose nanocrystals on reinforced poly(butylene succinate) nanocomposites.

Authors:  Taeho Kim; Hyeonyeol Jeon; Jonggeon Jegal; Joo Hyun Kim; Hoichang Yang; Jeyoung Park; Dongyeop X Oh; Sung Yeon Hwang
Journal:  RSC Adv       Date:  2018-04-24       Impact factor: 4.036

8.  Temperature dependence of the rigid amorphous fraction of poly(butylene succinate).

Authors:  Maria Cristina Righetti; Maria Laura Di Lorenzo; Patrizia Cinelli; Massimo Gazzano
Journal:  RSC Adv       Date:  2021-07-27       Impact factor: 4.036

9.  GBR membrane of novel poly (butylene succinate-co-glycolate) co-polyester co-polymer for periodontal application.

Authors:  Seyedramin Pajoumshariati; Hadi Shirali; Seyedeh Kimia Yavari; Sogol Naghavi Sheikholeslami; Ghogha Lotfi; Fatemeh Mashhadi Abbas; Alireza Abbaspourrad
Journal:  Sci Rep       Date:  2018-05-14       Impact factor: 4.379

10.  Risperidone Controlled Release Microspheres Based on Poly(Lactic Acid)-Poly(Propylene Adipate) Novel Polymer Blends Appropriate for Long Acting Injectable Formulations.

Authors:  Stavroula Nanaki; Panagiotis Barmpalexis; Alexandros Iatrou; Evi Christodoulou; Margaritis Kostoglou; Dimitrios N Bikiaris
Journal:  Pharmaceutics       Date:  2018-08-13       Impact factor: 6.321

  10 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.