Literature DB >> 11520170

Depth-dependent compressive properties of normal aged human femoral head articular cartilage: relationship to fixed charge density.

S S Chen1, Y H Falcovitz, R Schneiderman, A Maroudas, R L Sah.   

Abstract

OBJECTIVES: Determine the depth-varying confined and osmotic compression moduli of normal human articular cartilage from the femoral head, and test whether these moduli are dependent on fixed charge density. METHODS AND
RESULTS: Using an automated instrument to allow epifluorescence microscopy analysis during confined compression testing on cartilage samples, the equilibrium confined compression modulus (H(A 0)) was found to vary markedly with depth (z=0-1500 microm) from the articular surface. H(A 0) increased from 1.16+/-0.20 MPa in the superficial (0-125 microm) layer to 7.75+/-1.45 MPa in the deepest (1250-1500 microm) layer tested, and was fit by the expression, H(A 0)(z) [MPa]=1.44 exp(0.0012.z [microm]). Also, in successive slices of cartilage extending from the articular surface to the middle-deep regions, the bulk modulus (K(0)) and fixed charge density (FCD) increased, consistent with previous findings. While H(A 0), K(0), and FCD each varied with depth from the articular surface, the dependence of H(A 0) and K(0) on depth did not appear to be completely related to variations in FCD.
CONCLUSIONS: The confined compression modulus of normal aged human femoral head articular cartilage increases markedly with depth from the articular surface, a trend similar to that observed for articular cartilage from other joints in animals but with an absolute amplitude that is several-fold higher. The compressive properties were not simply related to FCD at different depths from the articular surface, suggesting that other as yet undefined factors also contribute to compressive properties. Copyright 2001 OsteoArthritis Research Society International.

Entities:  

Mesh:

Year:  2001        PMID: 11520170     DOI: 10.1053/joca.2001.0424

Source DB:  PubMed          Journal:  Osteoarthritis Cartilage        ISSN: 1063-4584            Impact factor:   6.576


  68 in total

1.  The correspondence between equilibrium biphasic and triphasic material properties in mixture models of articular cartilage.

Authors:  Gerard A Ateshian; Nadeen O Chahine; Ines M Basalo; Clark T Hung
Journal:  J Biomech       Date:  2004-03       Impact factor: 2.712

2.  Immunofluorescence-guided atomic force microscopy to measure the micromechanical properties of the pericellular matrix of porcine articular cartilage.

Authors:  Rebecca E Wilusz; Louis E DeFrate; Farshid Guilak
Journal:  J R Soc Interface       Date:  2012-06-06       Impact factor: 4.118

3.  Validation of finite element predictions of cartilage contact pressure in the human hip joint.

Authors:  Andrew E Anderson; Benjamin J Ellis; Steve A Maas; Christopher L Peters; Jeffrey A Weiss
Journal:  J Biomech Eng       Date:  2008-10       Impact factor: 2.097

4.  A cartilage growth mixture model with collagen remodeling: validation protocols.

Authors:  Stephen M Klisch; Anna Asanbaeva; Sevan R Oungoulian; Koichi Masuda; Eugene J-Ma Thonar; Andrew Davol; Robert L Sah
Journal:  J Biomech Eng       Date:  2008-06       Impact factor: 2.097

5.  * Constrained Cage Culture Improves Engineered Cartilage Functional Properties by Enhancing Collagen Network Stability.

Authors:  Robert J Nims; Alexander D Cigan; Krista M Durney; Brian K Jones; John D O'Neill; Wing-Sum A Law; Gordana Vunjak-Novakovic; Clark T Hung; Gerard A Ateshian
Journal:  Tissue Eng Part A       Date:  2017-03-27       Impact factor: 3.845

6.  Multiscale cartilage biomechanics: technical challenges in realizing a high-throughput modelling and simulation workflow.

Authors:  Ahmet Erdemir; Craig Bennetts; Sean Davis; Akhil Reddy; Scott Sibole
Journal:  Interface Focus       Date:  2015-04-06       Impact factor: 3.906

7.  Zone-dependent mechanical properties of human articular cartilage obtained by indentation measurements.

Authors:  J Antons; M G M Marascio; J Nohava; R Martin; L A Applegate; P E Bourban; D P Pioletti
Journal:  J Mater Sci Mater Med       Date:  2018-05-04       Impact factor: 3.896

8.  A biomechanical triphasic approach to the transport of nondilute solutions in articular cartilage.

Authors:  Alireza Abazari; Janet A W Elliott; Garson K Law; Locksley E McGann; Nadr M Jomha
Journal:  Biophys J       Date:  2009-12-16       Impact factor: 4.033

9.  Mechanical properties of human fetal talus.

Authors:  Roza Mahmoodian; Jeremi Leasure; Hemanth Gadikota; Franco Capaldi; Sorin Siegler
Journal:  Clin Orthop Relat Res       Date:  2009-01-14       Impact factor: 4.176

10.  Depth-dependent anisotropy of the micromechanical properties of the extracellular and pericellular matrices of articular cartilage evaluated via atomic force microscopy.

Authors:  Morgan A McLeod; Rebecca E Wilusz; Farshid Guilak
Journal:  J Biomech       Date:  2012-10-11       Impact factor: 2.712

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.