Literature DB >> 11333406

Respiratory health of automobile workers and exposures to metal-working fluid aerosols: lung spirometry.

E A Eisen1, T J Smith, D Kriebel, S R Woskie, D J Myers, S M Kennedy, S Shalat, R R Monson.   

Abstract

BACKGROUND: Despite substantial evidence that workers exposed to metal-working fluids (MWF) have increased respiratory morbidity, the few studies of chronic effects on lung function have not been conclusive.
METHODS: Lung spirometry was measured and both current and past exposures to metal-working fluid (MWF) aerosols were estimated in this cross-sectional cohort of 1,811 male automobile workers. Satisfactory exposure data were available for 1,745 (96%): 239 assemblers (never-exposed to MWF), 487 assemblers (previously exposed), 352 machinists currently exposed to straight oils, 441 to soluble oils, and 226 to synthetic fluids. Operations were classified as either grinding or non-grinding machining.
RESULTS: Current exposure was not found to be associated with either forced expiratory volume in 1 second (FEV(1)) or forced ventilatory capacity (FVC). Nor was past exposure to water-based fluids (soluble or synthetic MWF) related to pulmonary function. Past exposure to straight oils, however, was significantly associated with FVC. This association was more obvious among older workers and among workers who had never transferred from MWF exposed jobs to assembly.
CONCLUSIONS: The magnitude of the association between FVC and lifetime exposure to straight MWF was slightly larger than the estimated cigarette effect, suggesting that the impact of an additional year of exposure to 1 mg/m(3) of mineral oil particulate in the thoracic particle size range, has the same impact on FVC as smoking one pack per day for one more year.

Entities:  

Mesh:

Year:  2001        PMID: 11333406     DOI: 10.1002/ajim.1038

Source DB:  PubMed          Journal:  Am J Ind Med        ISSN: 0271-3586            Impact factor:   2.214


  7 in total

1.  Approximate and Pseudo-Likelihood Analysis for Logistic Regression Using External Validation Data to Model Log Exposure.

Authors:  Robert H Lyles; Lawrence L Kupper
Journal:  J Agric Biol Environ Stat       Date:  2013-03-01       Impact factor: 1.524

2.  An assessment of dermal exposure to semi-synthetic metal working fluids by different methods to group workers for an epidemiological study on dermatitis.

Authors:  B van Wendel de Joode; E P B Bierman; D H Brouwer; J Spithoven; H Kromhout
Journal:  Occup Environ Med       Date:  2005-09       Impact factor: 4.402

3.  Clinical investigation of an outbreak of alveolitis and asthma in a car engine manufacturing plant.

Authors:  W Robertson; A S Robertson; C B S G Burge; V C Moore; M S Jaakkola; P A Dawkins; M Burd; R Rawbone; I Gardner; M Kinoulty; B Crook; G S Evans; J Harris-Roberts; S Rice; P S Burge
Journal:  Thorax       Date:  2007-05-15       Impact factor: 9.139

4.  Lung function in asphalt pavers: a longitudinal study.

Authors:  Bente Ulvestad; Britt Grethe Randem; Øivind Skare; Trond Mogens Aaløkken; Georg Karl Myranek; Karine Elihn; May Brit Lund
Journal:  Int Arch Occup Environ Health       Date:  2016-10-08       Impact factor: 3.015

5.  The occupational exposure limit for fluid aerosol generated in metalworking operations: limitations and recommendations.

Authors:  Donguk Park
Journal:  Saf Health Work       Date:  2012-03-08

6.  Pulmonary function and high-resolution computed tomography examinations among offshore drill floor workers.

Authors:  Niels E Kirkhus; Øivind Skare; Bente Ulvestad; Trond Mogens Aaløkken; Anne Günther; Raymond Olsen; Yngvar Thomassen; May Brit Lund; Dag G Ellingsen
Journal:  Int Arch Occup Environ Health       Date:  2017-12-01       Impact factor: 3.015

7.  Risk Assessment for Metalworking Fluids and Respiratory Outcomes.

Authors:  Robert M Park
Journal:  Saf Health Work       Date:  2019-09-12
  7 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.