Literature DB >> 17504818

Clinical investigation of an outbreak of alveolitis and asthma in a car engine manufacturing plant.

W Robertson1, A S Robertson, C B S G Burge, V C Moore, M S Jaakkola, P A Dawkins, M Burd, R Rawbone, I Gardner, M Kinoulty, B Crook, G S Evans, J Harris-Roberts, S Rice, P S Burge.   

Abstract

BACKGROUND: Exposure to metal working fluid (MWF) has been associated with outbreaks of extrinsic allergic alveolitis (EAA) in the USA, with bacterial contamination of MWF being a possible cause, but is uncommon in the UK. Twelve workers developed EAA in a car engine manufacturing plant in the UK, presenting clinically between December 2003 and May 2004. This paper reports the subsequent epidemiological investigation of the whole workforce. The study had three aims: (1) to measure the extent of the outbreak by identifying other workers who may have developed EAA or other work-related respiratory diseases; (2) to provide case detection so that those affected could be treated; and (3) to provide epidemiological data to identify the cause of the outbreak.
METHODS: The outbreak was investigated in a three-phase cross-sectional survey of the workforce. In phase I a respiratory screening questionnaire was completed by 808/836 workers (96.7%) in May 2004. In phase II 481 employees with at least one respiratory symptom on screening and 50 asymptomatic controls were invited for investigation at the factory in June 2004. This included a questionnaire, spirometry and clinical opinion. 454/481 (94.4%) responded and 48/50 (96%) controls. Workers were identified who needed further investigation and serial measurements of peak expiratory flow (PEF). In phase III 162 employees were seen at the Birmingham Occupational Lung Disease clinic. 198 employees returned PEF records, including 141 of the 162 who attended for clinical investigation. Case definitions for diagnoses were agreed.
RESULTS: 87 workers (10.4% of the workforce) met case definitions for occupational lung disease, comprising EAA (n = 19), occupational asthma (n = 74) and humidifier fever (n = 7). 12 workers had more than one diagnosis. The peak onset of work-related breathlessness was Spring 2003. The proportion of workers affected was higher for those using MWF from a large sump (27.3%) than for those working all over the manufacturing area (7.9%) (OR = 4.39, p<0.001). Two workers had positive specific provocation tests to the used but not the unused MWF solution.
CONCLUSIONS: Extensive investigation of the outbreak of EAA detected a large number of affected workers, not only with EAA but also occupational asthma. This is the largest reported outbreak in Europe. Mist from used MWF is the likely cause. In workplaces using MWF there is a need to carry out risk assessments, to monitor and maintain fluid quality, to control mist and to carry out respiratory health surveillance.

Entities:  

Mesh:

Substances:

Year:  2007        PMID: 17504818      PMCID: PMC2117138          DOI: 10.1136/thx.2006.072199

Source DB:  PubMed          Journal:  Thorax        ISSN: 0040-6376            Impact factor:   9.139


  27 in total

1.  Metal-rich ambient particles (particulate matter 2.5) cause airway inflammation in healthy subjects.

Authors:  Frank Schaumann; Paul J A Borm; Andreas Herbrich; Johannes Knoch; Mike Pitz; Roel P F Schins; Birgit Luettig; Jens M Hohlfeld; Joachim Heinrich; Norbert Krug
Journal:  Am J Respir Crit Care Med       Date:  2004-06-30       Impact factor: 21.405

Review 2.  Hypersensitivity pneumonitis: current concepts.

Authors:  S J Bourke; J C Dalphin; G Boyd; C McSharry; C I Baldwin; J E Calvert
Journal:  Eur Respir J Suppl       Date:  2001-09

3.  Occupational asthma: validity of monitoring of peak expiratory flow rates and non-allergic bronchial responsiveness as compared to specific inhalation challenge.

Authors:  B Perrin; F Lagier; J L'Archevêque; A Cartier; L P Boulet; J Côté; J L Malo
Journal:  Eur Respir J       Date:  1992-01       Impact factor: 16.671

4.  Acute pulmonary responses among automobile workers exposed to aerosols of machining fluids.

Authors:  S M Kennedy; I A Greaves; D Kriebel; E A Eisen; T J Smith; S R Woskie
Journal:  Am J Ind Med       Date:  1989       Impact factor: 2.214

Review 5.  Lung volumes and forced ventilatory flows. Report Working Party Standardization of Lung Function Tests, European Community for Steel and Coal. Official Statement of the European Respiratory Society.

Authors:  P H Quanjer; G J Tammeling; J E Cotes; O F Pedersen; R Peslin; J C Yernault
Journal:  Eur Respir J Suppl       Date:  1993-03

6.  Health, employment, and financial outcomes in workers with occupational asthma.

Authors:  P F Gannon; D C Weir; A S Robertson; P S Burge
Journal:  Br J Ind Med       Date:  1993-06

7.  Hypersensitivity pneumonitis in a metal-working environment.

Authors:  M J Hodgson; A Bracker; C Yang; E Storey; B J Jarvis; D Milton; Z Lummus; D Bernstein; S Cole
Journal:  Am J Ind Med       Date:  2001-06       Impact factor: 2.214

8.  Lipoid pneumonia caused by oil mist exposure from a steel rolling tandem mill.

Authors:  M R Cullen; J R Balmes; J M Robins; G J Smith
Journal:  Am J Ind Med       Date:  1981       Impact factor: 2.214

9.  Occupational asthma due to oil mists.

Authors:  A S Robertson; D C Weir; P S Burge
Journal:  Thorax       Date:  1988-03       Impact factor: 9.139

10.  Occupational asthma due to an emulsified oil mist.

Authors:  M S Hendy; B E Beattie; P S Burge
Journal:  Br J Ind Med       Date:  1985-01
View more
  9 in total

1.  Investigating outbreaks.

Authors:  A J Newman Taylor
Journal:  Thorax       Date:  2007-11       Impact factor: 9.139

2.  Occupational respiratory and skin diseases among Finnish machinists: findings of a large clinical study.

Authors:  Timo Hannu; Katri Suuronen; Kristiina Aalto-Korte; Kristiina Alanko; Ritva Luukkonen; Merja Järvelä; Riitta Jolanki; Maritta S Jaakkola
Journal:  Int Arch Occup Environ Health       Date:  2012-03-16       Impact factor: 3.015

3.  Work-related adverse respiratory health outcomes at a machine manufacturing facility with a cluster of bronchiolitis, alveolar ductitis and emphysema (BADE).

Authors:  Kristin J Cummings; Marcia L Stanton; Kathleen Kreiss; Randy J Boylstein; Ju-Hyeong Park; Jean M Cox-Ganser; M Abbas Virji; Nicole T Edwards; Leopoldo N Segal; Martin J Blaser; David N Weissman; Randall J Nett
Journal:  Occup Environ Med       Date:  2020-03-04       Impact factor: 4.402

4.  Factors influencing the microbial composition of metalworking fluids and potential implications for machine operator's lung.

Authors:  Jean-Benjamin Murat; Frédéric Grenouillet; Gabriel Reboux; Emmanuelle Penven; Adam Batchili; Jean-Charles Dalphin; Isabelle Thaon; Laurence Millon
Journal:  Appl Environ Microbiol       Date:  2011-11-04       Impact factor: 4.792

Review 5.  Hypersensitivity Pneumonitis Due to Metalworking Fluid Aerosols.

Authors:  P Sherwood Burge
Journal:  Curr Allergy Asthma Rep       Date:  2016-08       Impact factor: 4.806

6.  Hypersensitivity pneumonitis in workers exposed to metalworking fluids.

Authors:  Christopher M Barber; Clare M Burton; David J Hendrick; C Anthony C Pickering; Alastair S Robertson; Wendy Robertson; P Sherwood Burge
Journal:  Am J Ind Med       Date:  2014-06-20       Impact factor: 2.214

7.  Spotlight on the diagnosis of extrinsic allergic alveolitis (hypersensitivity pneumonitis).

Authors:  Xaver Baur; Axel Fischer; Lygia T Budnik
Journal:  J Occup Med Toxicol       Date:  2015-04-20       Impact factor: 2.646

8.  Lesson of the month: extrinsic allergic (bronchiolo)alveolitis and metal working fluids.

Authors:  Paul Cullinan; Eva D'Souza; Rachel Tennant; Chris Barber
Journal:  Thorax       Date:  2014-07-08       Impact factor: 9.139

9.  Risk Assessment for Metalworking Fluids and Respiratory Outcomes.

Authors:  Robert M Park
Journal:  Saf Health Work       Date:  2019-09-12
  9 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.