Literature DB >> 11055294

Analysis of retrieved polymer fiber based replacements for the ACL.

M F Guidoin1, Y Marois, J Bejui, N Poddevin, M W King, R Guidoin.   

Abstract

The present retrospective analysis of 117 surgically excised anterior cruciate ligament (ACL) prostheses was designed to elucidate the etiology and mechanisms of failure of synthetic ligamentous prostheses. They were harvested from young and active patients (26 +/- 7 yrs) at various orthopaedic centers in France between 1983 and 1993. The average duration of implantation of augmentation and replacement prostheses were 21.5 +/- 12.6 and 33.2 +/- 25.3 months, respectively. The principal causes for their excision were ruptures and synovitis. Each ACL prosthesis was examined macroscopically, histologically, and, after tissue removal, by scanning electron microscopy (SEM) to determine the model, manufacturer, surgical technique used at implantation, the extent of healing, the site of rupture, and the morphology of the damaged fibers. Fourteen types of ACL prostheses were analysed, each fabricated using a different combination of polymers, fibers and textile constructions. Consequently, they generated a variety of healing characteristics and mechanical responses in vivo. SEM observations revealed that abrasion of the textile fibers as a result of yarn-on-yarn and/or yarn-on-bone contact was a common phenomenon to almost all models, and was the primary cause of prosthetic failure. Healing inside the synthetic ACL was poorly organized, incomplete and unpredictable as the extent of collagenous infiltration into the textile structure did not increase with the duration of implantation. In fact, the collagenous infiltration into certain models appeared to be more detrimental than beneficial since it caused deterioration and fraying of the textile structure rather than serving as a reinforcing matrix around the prosthesis. In conclusion, the present study shows that three mechanisms may be involved in the failure of ACL prostheses: (1) inadequate fiber abrasion resistance against osseous surfaces; (2) flexural and rotational fatigue of the fibers, and (3) loss of integrity of the textile structure due to unpredictable tissue infiltration during healing.

Entities:  

Mesh:

Substances:

Year:  2000        PMID: 11055294     DOI: 10.1016/s0142-9612(00)00114-9

Source DB:  PubMed          Journal:  Biomaterials        ISSN: 0142-9612            Impact factor:   12.479


  37 in total

1.  In vivo evaluation of the bone integration of coated poly(vinyl-alcohol) hydrogel fiber implants.

Authors:  David Moreau; Arthur Villain; Manon Bachy; Henry Proudhon; David N Ku; Didier Hannouche; Hervé Petite; Laurent Corté
Journal:  J Mater Sci Mater Med       Date:  2017-06-19       Impact factor: 3.896

2.  Biomimetic tissue-engineered anterior cruciate ligament replacement.

Authors:  James A Cooper; Janmeet S Sahota; W Jay Gorum; Janell Carter; Stephen B Doty; Cato T Laurencin
Journal:  Proc Natl Acad Sci U S A       Date:  2007-02-20       Impact factor: 11.205

3.  In silico evaluation of a new composite disc substitute with a L3-L5 lumbar spine finite element model.

Authors:  Jérôme Noailly; Luigi Ambrosio; K Elizabeth Tanner; Josep A Planell; Damien Lacroix
Journal:  Eur Spine J       Date:  2011-03-05       Impact factor: 3.134

4.  Cationised gelatin and hyaluronic acid coating enhances polyethylene terephthalate artificial ligament graft osseointegration in porcine bone tunnels.

Authors:  Samson Cho; Hong Li; Chen Chen; Jia Jiang; Hongyue Tao; Shiyi Chen
Journal:  Int Orthop       Date:  2012-11-07       Impact factor: 3.075

5.  Preparation and in vitro evaluation of a biomimetic nanoscale calcium phosphate coating on a polyethylene terephthalate artificial ligament.

Authors:  Chen Chen; Hong Li; Changan Guo; Shiyi Chen
Journal:  Exp Ther Med       Date:  2016-04-20       Impact factor: 2.447

6.  The myth: in vivo degradation of polypropylene-based meshes.

Authors:  Shelby F Thames; Joshua B White; Kevin L Ong
Journal:  Int Urogynecol J       Date:  2016-09-06       Impact factor: 2.894

7.  Preparation of porous biodegradable poly(lactide-co-glycolide)/ hyaluronic acid blend scaffolds: characterization, in vitro cells culture and degradation behaviors.

Authors:  Chih-Ta Lee; Yu-Der Lee
Journal:  J Mater Sci Mater Med       Date:  2006-12       Impact factor: 3.896

8.  Preparation of collagen modified photopolymers: a new type of biodegradable gel for cell growth.

Authors:  Gülay Bayramoğlu; Nilhan Kayaman-Apohan; Handan Akçakaya; Memet Vezir Kahraman; Serap Erdem Kuruca; Atilla Güngör
Journal:  J Mater Sci Mater Med       Date:  2010-02       Impact factor: 3.896

9.  A comparison of degradable synthetic polymer fibers for anterior cruciate ligament reconstruction.

Authors:  Nick Tovar; Sharon Bourke; Michael Jaffe; N Sanjeeva Murthy; Joachim Kohn; Charles Gatt; Michael G Dunn
Journal:  J Biomed Mater Res A       Date:  2010-05       Impact factor: 4.396

10.  Studies of polyurethane urea bands for ACL reconstruction.

Authors:  Elisabeth Liljensten; Katrin Gisselfält; Bengt Edberg; Hans Bertilsson; Per Flodin; Anders Nilsson; Anders Lindahl; Lars Peterson
Journal:  J Mater Sci Mater Med       Date:  2002-04       Impact factor: 3.896

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.