A simple methodological approach for counting and identifying culturable viruses adsorbed to cellulose nitrate membrane filters.

We identified conditions under which Buffalo green monkey cells grew on the surfaces of cellulose nitrate membrane filters in such a way that they covered the entire surface of each filter and penetrated through the pores. When such conditions were used, poliovirus that had previously been adsorbed on the membranes infected the cells and replicated. A plaque assay method and a quantal method (most probable number of cytopathic units) were used to detect and count the viruses adsorbed on the membrane filters. Polioviruses in aqueous suspensions were then concentrated by adsorption to cellulose membrane filters and were subsequently counted without elution, a step which is necessary when the commonly used methods are employed. The pore size of the membrane filter, the sample contents, and the sample volume were optimized for tap water, seawater, and a 0.25 M glycine buffer solution. The numbers of viruses recovered under the optimized conditions were more than 50% greater than the numbers counted by the standard plaque assay. When ceftazidime was added to the assay medium in addition to the antibiotics which are typically used, the method could be used to study natural samples with low and intermediate levels of microbial pollution without decontamination of the samples. This methodological approach also allowed plaque hybridization either directly on cellulose nitrate membranes or on Hybond N+ membranes after the preparations were transferred.