Literature DB >> 10407532

Bone response to orthodontic loading of endosseous implants in the rabbit calvaria: early continuous distalizing forces.

Z Majzoub1, M Finotti, F Miotti, R Giardino, N N Aldini, G Cordioli.   

Abstract

The purpose of this experimental study was to evaluate the effect of early orthodontic loading on the stability and bone-implant interface of titanium implants in a rabbit model. Twenty-four short threaded titanium fixtures were inserted in the calvarial mid-sagittal suture of 10 rabbits. Two weeks following insertion, 20 implants (test group) were subjected to continuous distalization forces of 150 g for a period of 8 weeks. The remaining four implants (control group) were left unloaded for the same follow-up interval. Clinically, all implants except for one test fixture were stable, and exhibited no mobility or displacement throughout the experimental loading period. Histologically, all stable implants were well-integrated into bone. No differences could be found between the pressure and tension surfaces of the test implants relative to bone quality and density within a range of 1000 microns from the fixture surface. Similarly, qualitative differences were not observed between the apical and coronal portions of test fixtures. Morphometrically, a mean percentage bone-to-implant contact of 76.00 +/- 18.73 per cent was found at the test pressure sides, 75.00 +/- 11.54 per cent at the test tension sides, and 68.00 +/- 15.55 per cent at the control unloaded surfaces. No statistically significant differences in the percentage of bone-to-metal contact length fraction were found between test pressure surfaces, test tension surfaces, and unloaded control surfaces. Marginal bone resorption around the implant collar or immediately beneath it was found in roughly the same percentage of analysed sites in the test and control fixtures. In contrast, slight bone apposition was demonstrated at the implant collar of the test pressure surfaces, while no apposition or resorption were observed in the test tension zones. This study suggests that short endosseous implants can be used as anchoring units for orthodontic tooth movement early in the post-insertion healing period.

Entities:  

Mesh:

Substances:

Year:  1999        PMID: 10407532     DOI: 10.1093/ejo/21.3.223

Source DB:  PubMed          Journal:  Eur J Orthod        ISSN: 0141-5387            Impact factor:   3.075


  4 in total

1.  Comparison of Anchorage Pattern under Two Types of Orthodontic Mini- Implant Loading During Retraction in Type A Anchorage Cases.

Authors:  B Imran Khan; Gowri Sankar Singaraju; Prasad Mandava; G Vivek Reddy; Venkatesh Nettam; Venkat Naidu Bhavikati
Journal:  J Clin Diagn Res       Date:  2016-10-01

2.  Evaluation of the effect of force direction on stationary anchorage success of mini-implant with a lever-arm-shaped upper structure.

Authors:  Ki-Ho Park; Eun-Man Lee; Seung-Il Shin; Seong-Hun Kim; Young-Guk Park; Su-Jung Kim
Journal:  Angle Orthod       Date:  2011-05-26       Impact factor: 2.079

3.  Long-term follow-up of dental single implants under immediate orthodontic load.

Authors:  Lisiane Meira Palagi; Carlos Eduardo Sabrosa; Eveline C B Gava; Tiziano Baccetti; Jose Augusto M Miguel
Journal:  Angle Orthod       Date:  2010-09       Impact factor: 2.079

4.  Application of Orthodontic Immediate Force on Dental Implants: Histomorphologic and Histomorphometric Assessment.

Authors:  Mansour Rismanchian; Sayed Hamid Raji; Sayed Mohammad Razavi; Danesh Teimouri Rick; Amin Davoudi
Journal:  Ann Maxillofac Surg       Date:  2017 Jan-Jun
  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.