Calculating shielding requirements in diagnostic X-ray departments.

Structural radiation protection for diagnostic X-ray facilities is most commonly performed following the recommendations of the National Council on Radiation Protection and Measurements Report No. 49. A number of analytical methods have already been developed to improve the design of these facilities. Specifically, these methods reassess shielding calculations in X-ray areas with respect to the methodology of the calculation of the barrier thickness and the number of sources considered in the area. Thus, they generate an overall solution for the cases met at the medical radiation structural design. This paper presents an extension of an existing method for calculating shielding requirements, for multiple X-ray tubes in a room operated at various beam qualities. The methodology computes the required shielding thickness such that the exposure behind it stays below a desired value. The presented method eliminates the overestimation of added shielding thickness which may occur using the other methods already mentioned. A user-friendly windows-based program has also been developed to assist shielding computations.