F Isidor1, K Brøndum, G Ravnholt. 1. Department of Prosthetic Dentistry and Stomatognathic Physiology, Royal Dental College, Aarhus University, Denmark.
Abstract
PURPOSE: The purpose of this in vitro study was to evaluate the influence of post and ferrule length on the resistance to cyclic (fatigue) loading of teeth with prefabricated titanium posts (ParaPost) and crowns. MATERIALS AND METHODS: Ninety bovine teeth with similar dimensions were mounted in acrylic blocks with artificial silicone periodontal ligaments. Combinations of post lengths of 5 mm, 7.5 mm, and 10 mm, and ferrule lengths (i.e., the vertical dentinal overlap of the crown) of 0 mm, 1.25 mm, and 2.5 mm made up 9 different groups consisting of 10 teeth each. The posts were cemented with zinc phosphate cement. Composite-resin cores were made and crowns were cemented. Each test specimen underwent cyclic loading of 400 N with a frequency of 1 load per second at an angulation of 45 degrees to the long axis of the tooth. RESULTS: All but 2 specimens failed with a root fracture; in the remaining 2 specimens the core lost retention. A large variation in the results between the various groups was observed. A nonparametric 2-way analysis for groups with a natural order revealed that the fracture resistance to cyclic loading increased statistically significantly with increasing ferrule length (P < 0.01), whereas increasing post length did not increase fracture resistance (P = 0.44). CONCLUSION: Ferrule length was more important than post length in increasing fracture resistance to cyclic loading of crowned teeth.
PURPOSE: The purpose of this in vitro study was to evaluate the influence of post and ferrule length on the resistance to cyclic (fatigue) loading of teeth with prefabricated titanium posts (ParaPost) and crowns. MATERIALS AND METHODS: Ninety bovine teeth with similar dimensions were mounted in acrylic blocks with artificial silicone periodontal ligaments. Combinations of post lengths of 5 mm, 7.5 mm, and 10 mm, and ferrule lengths (i.e., the vertical dentinal overlap of the crown) of 0 mm, 1.25 mm, and 2.5 mm made up 9 different groups consisting of 10 teeth each. The posts were cemented with zinc phosphate cement. Composite-resin cores were made and crowns were cemented. Each test specimen underwent cyclic loading of 400 N with a frequency of 1 load per second at an angulation of 45 degrees to the long axis of the tooth. RESULTS: All but 2 specimens failed with a root fracture; in the remaining 2 specimens the core lost retention. A large variation in the results between the various groups was observed. A nonparametric 2-way analysis for groups with a natural order revealed that the fracture resistance to cyclic loading increased statistically significantly with increasing ferrule length (P < 0.01), whereas increasing post length did not increase fracture resistance (P = 0.44). CONCLUSION: Ferrule length was more important than post length in increasing fracture resistance to cyclic loading of crowned teeth.
Authors: Gergo Mitov; Michael Dörr; Frank P Nothdurft; Florian Draenert; Peter R Pospiech Journal: Clin Oral Investig Date: 2014-10-04 Impact factor: 3.573