Literature DB >> 10071469

Marginal adaptation of direct composite and sandwich restorations in Class II cavities with cervical margins in dentine.

T Dietrich1, A C Lösche, G M Lösche, J F Roulet.   

Abstract

OBJECTIVES: The aim of this study was to evaluate the marginal adaptation of direct Class II sandwich restorations with resin-modified glass-ionomer cements and compomers in comparison to base and total bond restorations. For sandwich restorations with a triple cure resin-modified glass-ionomer cement the influence of different light curing techniques was also evaluated.
METHODS: Large butt-joint class II cavities with cervical margins 1 mm below the cemento-enamel junction were cut into 120 extracted human molars. The cavities (15 groups, n = 8) were filled using a sandwich, base or total bond technique with materials from five different manufacturers. A three-sited light curing technique was used in 13 groups. For the material combination Vitremer/Z100 two additional groups with a different wand positioning and a metal matrix were evaluated. After water storage for 21 days and thermocycling (2000x, 5-55 degrees C), replicas were quantitatively analysed in the SEM. Statistical analysis was performed with the Kruskal-Wallis test and the Bonferroni test at p < 0.05.
RESULTS: The marginal adaptation of vertical enamel margins was not dependent on the restorative technique. For margins in dentine, marginal adaptation was significantly better with the sandwich technique than with a base or total bond technique for all materials. There were no significant differences between the base and total bond technique. Overall, resin-modified glass-ionomer cements showed somewhat better results than compomers in sandwich restorations, though differences were not significant for some criteria. Vitremer/Z100 sandwich restorations applied with a metal matrix showed the highest mean percentage of excellent margins of all experimental groups.
CONCLUSIONS: Both resin-modified glass-ionomer cements and compomers can improve the marginal quality when used in a sandwich technique. Further research is necessary to determine the ideal material combination for sandwich restorations.

Entities:  

Mesh:

Substances:

Year:  1999        PMID: 10071469     DOI: 10.1016/s0300-5712(98)00035-9

Source DB:  PubMed          Journal:  J Dent        ISSN: 0300-5712            Impact factor:   4.379


  10 in total

1.  Microleakage in class V gingiva-shaded composite resin restorations.

Authors:  Claudio Poggio; Marco Chiesa; Alberto Dagna; Marco Colombo; Andrea Scribante
Journal:  Ann Stomatol (Roma)       Date:  2012-05-03

2.  Effects of three restorative techniques in the bond strength and nanoleakage at gingival wall of Class II restorations subjected to simulated aging.

Authors:  Cristina de Mattos Pimenta Vidal; Sabrina Pavan; André Luiz Fraga Briso; Ana Karina Bedran-Russo
Journal:  Clin Oral Investig       Date:  2012-05-11       Impact factor: 3.573

3.  Microleakage in Class V cavities with self-etching adhesive system and conventional rotatory or laser Er,Cr:YSGG.

Authors:  K Trelles; J Arnabat; T España-Tost
Journal:  Laser Ther       Date:  2012-12-26

4.  Effect of Saliva Contamination on Microleakage of Open Sandwich Restorations.

Authors:  Çiğdem Çelik; Yusuf Bayraktar; Behiye Esra Özdemir
Journal:  Acta Stomatol Croat       Date:  2020-09

5.  Influence of Matrix Type on Marginal Gap Formation of Deep Class II Bulk-Fill Composite Restorations.

Authors:  Britta Hahn; Imme Haubitz; Ralf Krug; Gabriel Krastl; Sebastian Soliman
Journal:  Int J Environ Res Public Health       Date:  2022-04-19       Impact factor: 4.614

6.  Microleakage after Thermocycling of Three Self-Etch Adhesives under Resin-Modified Glass-Ionomer Cement Restorations.

Authors:  Sabine O Geerts; Laurence Seidel; Adelin I Albert; Audrey M Gueders
Journal:  Int J Dent       Date:  2010-06-06

7.  Marginal adaptation of an etch-and-rinse adhesive with a new type of solvent in class II cavities after artificial aging.

Authors:  Juergen Manhart; Cordula Trumm
Journal:  Clin Oral Investig       Date:  2009-11-24       Impact factor: 3.573

8.  Effect of Direct and Indirect Materials on Stress Distribution in Class II MOD Restorations: A 3D-Finite Element Analysis Study.

Authors:  Şemsi Alp; Laden Gulec Alagoz; Nuran Ulusoy
Journal:  Biomed Res Int       Date:  2020-12-15       Impact factor: 3.411

9.  Evaluation of microleakage in Class II composite restorations: Bonded-base and bulk-fill techniques.

Authors:  Atiyeh Feiz; Marzieh Sajedi; Niloufar Jafari; Edward J Swift
Journal:  Dent Res J (Isfahan)       Date:  2021-10-21

10.  Transmission of composite polymerization contraction force through a flowable composite and a resin-modified glass ionomer cement.

Authors:  Juan Carlos Castañeda-Espinosa; Rosana Aparecida Pereira; Ana Paula Cavalcanti; Rafael Francisco Lia Mondelli
Journal:  J Appl Oral Sci       Date:  2007-12       Impact factor: 2.698

  10 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.