Literature DB >> 9930428

Endothelialization of biosynthetic vascular prostheses after laser perforation.

M Grabenwöger1, F Fitzal, J Sider, C Csekö, H Bergmeister, H Schima, W Husinsky, P Böck, E Wolner.   

Abstract

OBJECTIVE: This study was undertaken to investigate the feasibility of transmural capillary ingrowth into the inner surface of biosynthetic vascular prostheses (Omniflow, BioNova, Melbourne, Australia) through perforations created by an excimer laser, thus inducing an endothelial cell coverage.
METHOD: Biosynthetic vascular prostheses (Omniflow, 10 cm length, 6 mm diameter) were perforated with an excimer laser (diameter of the holes 50 to 100 microm, distance 4 mm) and implanted into the carotid arteries of eight sheep. They were compared to untreated Omniflow prostheses implanted at the contralateral side. Three months after implantation the prostheses were explanted and evaluated by gross morphology, histologic examination, scanning electron microscopy, and immunohistochemical staining for factor VIII to identify endothelial cells.
RESULTS: All grafts remained patent. Gross morphologic examination revealed no significant difference in the thrombus-free surface between perforated and untreated prostheses. However, scanning electron microscopy showed endothelial cells in the midgraft portion of all perforated prostheses, whereas collagen fibers, fibrin meshwork, and activated platelets formed the inner layer in six of eight untreated Omniflow prostheses. Transmural capillary ingrowth in the laser group was verified by positive factor VIII staining for endothelial cells in the laser channels.
CONCLUSION: Spontaneous endothelialization of biosynthetic vascular prostheses can be achieved by transmural capillary ingrowth through perforations in the wall of the prostheses in an experimental sheep model.

Entities:  

Mesh:

Substances:

Year:  1998        PMID: 9930428     DOI: 10.1016/s0003-4975(98)00982-5

Source DB:  PubMed          Journal:  Ann Thorac Surg        ISSN: 0003-4975            Impact factor:   4.330


  5 in total

1.  Rapid biofabrication of tubular tissue constructs by centrifugal casting in a decellularized natural scaffold with laser-machined micropores.

Authors:  Vladimir A Kasyanov; Jason Hodde; Michael C Hiles; Carol Eisenberg; Leonard Eisenberg; Luis E F De Castro; Iveta Ozolanta; Modra Murovska; Robert A Draughn; Glenn D Prestwich; Roger R Markwald; Vladimir Mironov
Journal:  J Mater Sci Mater Med       Date:  2008-09-20       Impact factor: 3.896

2.  Tissue reaction to three different types of tissue glues in an experimental aorta dissection model: a quantitative approach.

Authors:  Kirsti Witter; Zbynek Tonar; Vít Martin Matejka; Tomás Martinca; Michael Jonák; Slavomír Rokosný; Jan Pirk
Journal:  Histochem Cell Biol       Date:  2009-11-10       Impact factor: 4.304

3.  Tissue-engineered heart valve with a tubular leaflet design for minimally invasive transcatheter implantation.

Authors:  Ricardo Moreira; Thaddaeus Velz; Nuno Alves; Valentine N Gesche; Axel Malischewski; Thomas Schmitz-Rode; Julia Frese; Stefan Jockenhoevel; Petra Mela
Journal:  Tissue Eng Part C Methods       Date:  2014-12-19       Impact factor: 3.056

4.  In vivo Quantification of the Effects of Radiation and Presence of Hair Follicle Pores on the Proliferation of Fibroblasts in an Acellular Human Dermis in a Dorsal Skinfold Chamber: Relevance for Tissue Reconstruction following Neoadjuvant Therapy.

Authors:  Mario Vitacolonna; Djeda Belharazem; Patrick Maier; Peter Hohenberger; Eric Dominic Roessner
Journal:  PLoS One       Date:  2015-05-08       Impact factor: 3.240

5.  Effect of static seeding methods on the distribution of fibroblasts within human acellular dermis.

Authors:  Mario Vitacolonna; Djeda Belharazem; Peter Hohenberger; Eric D Roessner
Journal:  Biomed Eng Online       Date:  2013-06-24       Impact factor: 2.819

  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.